The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

jfn302 at yahoo.com



Standing rigging thickness

2014-02-13; 20:22:15 EST

Member Since

2013-12-12

Posts: 66

Hey John,

I would be very cautious about upgrading the wire to a larger diameter, I
was reading about doing that on my own and the larger diameter wire requires
higher tension which in turn creates higher loads on the mast and in turn
creates higher pressure on the deck, which causes cracking and such.. over
all, it's not a good idea to change the diameter from what I read, if I can
find the links that the rigging engineer gave all the details in, I'll
definitely post them so you can read for yourself, but 1/8th cable is what
our rig was designed with and what it should be kept at is the general gist
of what I got from it.  Especially since our masts don't tend to have a
compression post below them.

James

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting