The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Dennis McNeely



Standing rigging thickness

2014-02-13; 20:47:31 EST

Member Since

2004-08-07

Posts: 88

Hopefully I attached a rig tensioning file correctly. Rhodes' 1/8" wire is
about 3mm, so the recommended tension is 145 kg (or 320 pounds) on our
masthead forestay, and 110 kg (240 pounds) on the shrouds. On the Rhodes,
this means setting up the forestay length prior to raising the mast, then
tensioning each of the backstays at 160 pounds. The forestay length will
affect the mast rake, which will in turn affect weather / lee helm.

It goes without saying that you need to have the mast perpendicular to the
deck as you tension the shrouds. Only the proper dose of rum can correct a
mast with a 10 degree list :-)

The guide goes on to say the lower shrouds should be about 95kg (210
pounds), or 10 - 12% of the wire's breaking strength. Make sure you tighten
them evenly - an 'S' bend in the mast ruins the boat's aesthetics.

Having said all of the above, it's just a guide. Lacking anything better to
do, I try to follow the directions - which I can generally do. 

On a good day.

Dennis 
Magic Moments
Currently casting shadows on the frozen Detroit River.



Rig tensioning using the Loos.pdf
See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting