2014-02-15; 11:46:57 EST
Member Since
2008-05-11
Posts: 393
Gentlemen, When I tighten the turnbuckles on my boat I hold the top of the turnbuckle with a pair of pliers to keep the wire from twisting and then tighten by hand. Rick I can get the main side stays up to 300lbs. but my hands are about at their limit to do that. I prefer 10% of tension over 15% and I rake my mast back about 1* or so to improve the amount of weather helm. I have also experimented with using the baby stays to give the mast a slight bend to change mainsail shape. James a heaver wire doesn't mean the tension must be increased 200 lbs of force is plenty what the heaver wire dose is to provide more resistance to shock loads from gusts and extreme conditions. My boat came with the cabin a little bent on the port side which is where there is no support in the stock design. I have improved over this by splitting the bulkhead in two. I have a port and starboard shoulder and have a leaf spring which acts as a compression arch (see pict). DSCF0298.jpg This has corrected my cabin deformation issues to a large degree. I'm redoing this setup this year since wood ants got into it 2 yrs ago and ate the bulkhead. I will be moving it forward 2" to put the arch directly under the mast for better support. I'm also removing about half of the original concrete ballast and will be replacing it with lead ingots epoxied to the hull and glassed over. That should keep me busy till all this damn snow melts. Pictures when the projects complete Best to all John S -- View this message in context: http://rhodes-22.1065344.n5.nabble.com/Standing-rigging-thickness-tp47474p47493.html Sent from the Rhodes 22 mailing list archive at Nabble.com.See the original archive post