2014-02-15; 13:16:08 EST
Member Since
2008-05-11
Posts: 393
My side stays have no play left in them at all. I ran out of turnbuckle adjustment last yr and had only 180 lbs. of tension on the wire. There is no indication of cracking or failure at any chain-plate location. I tightened the side stay chain-plates this last season they looked fine. The original stay probably came with the turnbuckle set half way in (I believe that is the standard unless you order them special) so my stays must have stretched at least 1 " over a 43 yr period. With the boom up one reef in 150 Genoa 50% reefed in 12 kn winds heeled 12-15* the lee side stays are not loose, they are dangling in the breeze. 5 yrs of sailing in and I'm comfortable handling the boat in that set up but these stays just bug me. A small cost and weight penalty vs a 50% increase in load capacity, piece of mind, and knowing how hard Rummy has pushed the original. I'll capsize the boat before the rigging fails. Perhaps a compromise do the fore-stay and side stays in 5/32 and the baby and back-stays in 1/8. PS; Graham you are correct to much tension is not good but to loose is not good either. In keeping the mast up the rigging transfers wind energy to the hull to drive the boat. It takes energy to stretch a wire, that's energy that's not driving the boat. best John S -- View this message in context: http://rhodes-22.1065344.n5.nabble.com/Standing-rigging-thickness-tp47474p47498.html Sent from the Rhodes 22 mailing list archive at Nabble.com.See the original archive post