The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Graham Stewart



Standing rigging thickness

2014-02-15; 17:09:34 EST

Member Since

2005-04-29

Posts: 816

John:
Based on your description your rig does not seem too tight to me. I would
not want the lee shrouds to be too loose. I let that happen on a previous
boat and I ended up losing a clevis pin at the chainplate  from the shroud
shaking. I know another fellow who had a rig so loose that the upper shroud
shook loose from the spreader.  Losing the spreader connection or a clevis
pin on the lee side in strong winds is definitely a sobering experience. I
like to have it without tension but not so loose it is shaking about.

 I have no idea why the rig would get looser. I can't say mine has changed
appreciably since the boat was new in 76. I wonder if the problem might be
the type of wire used?

Graham 


See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting