The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Graham Stewart



Standing rigging thickness

2014-02-18; 16:17:57 EST

Member Since

2005-04-29

Posts: 816

Ken:

Thanks for the reply. I completely understand. My boat is frozen into a snow
bank as well. 

Many years ago I removed the bulkhead when I rebuilt the interior of the
boat and when I went to install it again it was too tight to fit in place. I
foolishly trimmed the bulkhead to fit rather than jack up the cabin top.
Once I was at sea on a heal with the rigging under tension I could see that
there was excessive space between the top of the bulkhead and the cabin top
- especially at the corner of the cabin top. can't remember if I shortened
the post or not - hence the question. When I reinstall the bulkhead again I
would like to return the bulkhead to its original dimensions if possible but
otherwise will just have to make my best guess..

Graham 



See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting