> On Feb 18, 2014, at 4:15 PM, "Graham [via Rhodes 22]" <ml-node+s1065344n47528h88 at n5.nabble.com> wrote:
>> Ken:
>> Thanks for the reply. I completely understand. My boat is frozen into a snow
> bank as well.
>> Many years ago I removed the bulkhead when I rebuilt the interior of the
> boat and when I went to install it again it was too tight to fit in place. I
> foolishly trimmed the bulkhead to fit rather than jack up the cabin top.
> Once I was at sea on a heal with the rigging under tension I could see that
> there was excessive space between the top of the bulkhead and the cabin top
> - especially at the corner of the cabin top. can't remember if I shortened
> the post or not - hence the question. When I reinstall the bulkhead again I
> would like to return the bulkhead to its original dimensions if possible but
> otherwise will just have to make my best guess..
>> Graham
>>>> -----Original Message-----
> From: [hidden email]
> [mailto:[hidden email]] On Behalf Of KenBates
> Sent: February-18-14 12:32 PM
> To: [hidden email]
> Subject: Re: [Rhodes22-list] Standing rigging thickness
>> Graham
> I dont have a dimension for replacement , Knot at work is snuged up under a
> carport, wrapped in blankets behind 4-6 foot of snow here in the frozen
> north (Kalamazoo).
> if you have the warped floor issue and the compression post is still there,
> I doubt that the post has changed, water left in the bilge combined with
> excessive pressure will for sure have damaged the bulkhead first. My post
> had not changed length, the supporting bulkhead had collapsed. Jacking the
> bulkhead removed all of the dimensional oddities by 1/2 inch, and in spring
> I had to lengthen all the turnbuckles, and add a link from the chainplates
> Ken
>>>> --
> View this message in context:
>http://rhodes-22.1065344.n5.nabble.com/Standing-rigging-thickness-tp47474p47> 527.html
> Sent from the Rhodes 22 mailing list archive at Nabble.com.
> __________________________________________________
> To subscribe/unsubscribe go to
>http://www.rhodes22.org/mailman/listinfo/rhodes22-list>> For the list Charter and help with using the mailing list and archives go to
>http://www.rhodes22.org/list> __________________________________________________
>>> ---
> This email is free from viruses and malware because avast! Antivirus protection is active.
>http://www.avast.com>> __________________________________________________
> To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list>> For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list> __________________________________________________
>>> If you reply to this email, your message will be added to the discussion below:
>http://rhodes-22.1065344.n5.nabble.com/Standing-rigging-thickness-tp47474p47528.html> To unsubscribe from Standing rigging thickness, click here.
> NAML
--
View this message in context: http://rhodes-22.1065344.n5.nabble.com/Standing-rigging-thickness-tp47474p47529.html
Sent from the Rhodes 22 mailing list archive at Nabble.com.
×
Message to Webmaster:
To use your email application to send a messsage to the webmaster rather than this form,
.