The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Graham Stewart



Searching the archives and settled step >now mast step cb leak

2014-03-06; 13:24:49 EST

Member Since

2005-04-29

Posts: 816

Ric:

My CB cap broke in about the same place as you describe when I was removing
it. I have no idea why it would break while installed, but in the case of my
cap it was quite thin in that area and I suspect that a heavy object falling
on the cap, such as a floorboard, might be sufficient to crack it. I beefed
mine up quite a bit before I reinstalled it.

The CB line for my boat is 12' long and looks like 5/16 diameter braided
nylon. I am virtually certain that this was the original line as the cap had
been installed with a fibreglass sheet over it and sealed with some very
tenacious caulking and , as I recall, rivets. Getting the cap off was very
difficult - hence it was broken in the process. Once I had rebuilt the cap
as well as the base which had been badly damaged during the removal of the
cap, I reinstalled the cap with stainless bolts rather than screws

Graham 


See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting