The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

Graham Stewart



centerboard attachment

2014-03-06; 17:41:27 EST

Member Since

2005-04-29

Posts: 816

I have changed the title of this exchange as it appear the topic has morphed
from the matter of the mast post base to the question of how the centreboard
is attached and how this might result in damage to the cap if the
centreboard is not held in the up position when launching.

My centreboard pivot pin rides in two vertical channels in the housing that
are about 5" long. Those grooves are very clear in the second photo that Rob
Lowe just posted. As I saw it, the channels would allow the pin to be
dropped down to the proper position without the need to insert the pin from
the outside of the housing.  It now occurs to me  that this design might
also have been intended to allow the pivot pin to rise up inside the housing
should the centreboard hit something. Makes sense although perhaps not if
this would allow the centreboard to damage the cap.  

In my case two length of .5 inch rigid PVC  pipe were placed in each channel
above the pin. It appears that these pipes were intended to prevent the pin
from rising up. As I mentioned earlier, I was pretty sure that the cap had
never been removed and assumed, therefore, that the pieces of pipe were part
of the original design. Now I am beginning to wonder if this was some kind
of retrofit by a previous owner who, perhaps, was responding to damage
caused when the centreboard was pushed into the cap. 

I am inclined to leave the pieces of pipe out when I reinstall the
centreboard or perhaps search for something that might act as a shock
absorber but still allow the board to raise up if it hits a solid object.
Perhaps shorter lengths of flexible plastic tubing would work. 

Has anyone else found a similar arrangement in the pivot pin channel? 
Any thoughts?

Graham 


See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting