< prior
Back to Month
Go to Thread
2014-03-07; 12:46:23 EST
Member Since
2008-02-18
Posts: 319
Todd, I love ya man, but I 'm not tearing apart the cb cap and yanking the cb out to take photos if the pin and bushings. I didn't take pictures at the time of repair. I have to go to lunch with my wife right now but I will try to look up more on this when I get back. Jerry Jerry,See the original archive post
> > Can you post pbbics of your pin and bushings? My cb flops around a bit. I > may have to turn a new shaft and bushings on the lathe. > > There was also a thread sometime ago about putting short pieces of hose in > the trunk to limit movement of the cb. If anyone has those pics or an idea > when it was, I would appreciate if you could post and comment. > > Todd T. > -- > Sent from my Android phone with mail.com Mail. Please excuse my brevity. > > cjlowe at sssnet.com wrote: > > I have a different take on some of these issues, don't know if I'm right, > probably just a different take. I think I remember someone on the list > saying the pcv pieces slide on each side of the cb pin and act as a > sacrificial bushing , so the stainless steel pivot pin doesn't eat out the > fiberglass in the side and bottom of the grove. Hope I didn't dream that, > because I spent a lot of time making them bushings, mine didn't have them. > I'm not sure trying to limit the cb's vertical movement is the best > idea. I'm thinking anything you put in the channels has a chance of > falling out and jambing the cb travel. Anything hard screwed in the > channels has a good chance of tearing big holes in the cb trunk and > taking out both sides of the cb cap. If you think fixing the cb cap was > a pain, ask Lou how much fun it is to do repairs inside the centerboard > trunk. > I'm thinking the best bet is to not anchor/moor in shallow water, don't > motor backward in shallow water, and NEVER EVER splash the boat unless > the cb pendant is cleated with the cb in the UP position. Any other ides > on this are more than welcome. > > Jerry > > > >> I have changed the title of this exchange as it appear the topic has >> morphed >> from the matter of the mast post base to the question of how the >> centreboard >> is attached and how this might result in damage to the cap if the >> centreboard is not held in the up position when launching. >> >> My centreboard pivot pin rides in two vertical channels in the housing >> that >> are about 5" long. Those grooves are very clear in the second photo that >> Rob >> Lowe just posted. As I saw it, the channels would allow the pin to be >> dropped down to the proper position without the need to insert the pin >> from >> the outside of the housing. It now occurs to me that this design might >> also have been intended to allow the pivot pin to rise up inside the >> housing >> should the centreboard hit something. Makes sense although perhaps not >> if >> this would allow the centreboard to damage the cap. >> >> In my case two length of .5 inch rigid PVC pipe were placed in each >> channel >> above the pin. It appears that these pipes were intended to prevent the >> pin >> from rising up. As I mentioned earlier, I was pretty sure that the cap >> had >> never been removed and assumed, therefore, that the pieces of pipe were >> part >> of the original design. Now I am beginning to wonder if this was some >> kind >> of retrofit by a previous owner who, perhaps, was responding to damage >> caused when the centreboard was pushed into the cap. >> >> I am inclined to leave the pieces of pipe out when I reinstall the >> centreboard or perhaps search for something that might act as a shock >> absorber but still allow the board to raise up if it hits a solid >> object. >> Perhaps shorter lengths of flexible plastic tubing would work. >> >> Has anyone else found a similar arrangement in the pivot pin channel? >> Any thoughts? >> >> Graham >> >> >> -----Original Message----- >> From: rhodes22-list-bounces at rhodes22.org >> [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of Lowe, Rob >> Sent: March-06-14 3:13 PM >> To: The Rhodes 22 Email List >> Subject: Re: [Rhodes22-list] Searching the archives and settled step >> >now >> mast step cb leak >> >> It seems like there are various versions of CB and the lift systems. >> Here >> are some photos that someone (I forgot who, sorry!) posted of their CB >> taken >> apart. - rob >> >> http://www.rhodes22.org/pipermail/rhodes22-list/attch/200507/14/Getaway1.jpg >> http://www.rhodes22.org/pipermail/rhodes22-list/attch/200507/14/Getaway2.jpg >> >> >> >> -----Original Message----- >> From: rhodes22-list-bounces at rhodes22.org >> [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of Ric Stott >> Sent: Thursday, March 06, 2014 2:00 PM >> To: The Rhodes 22 Email List >> Subject: Re: [Rhodes22-list] Searching the archives and settled step >> >now >> mast step cb leak >> >> Thanks Graham >> It might have been cracked when they loaded it onto a trailer to launch >> last >> spring and delivered it to me. >> It was a transport trailer. >> Sam replied that the pendant had to be cleated when trailered, or it >> would >> cause a crack. >> I'd like to understand the mechanics of that reply. >> Is the top or aft edge of the CB that close to the cap, and what >> component >> would allow it to move vertically, a hinge pin? >> Is there a CB diagram anywhere? >> I think it was leaking, but very little until later in the season then >> - after a storm, it got much worse. >> The boat may have been on the bottom or bounced on the bottom at a very >> low >> tide. >> I'll take it apart when it warms up. >> Pendant - Braided nylon is very stretchy - is that what we want? >> Ric >> >> On Mar 6, 2014, at 1:24 PM, Graham Stewart wrote: >> >>_____________________________________________ > >> To subscribe/unsubscribe go to >> http://www.rhodes22.org/mailman/listinfo/rhodes22-list >> >> For the list Charter and help with using the mailing list and archives >> go >> to >> http://www.rhodes22.org/list >>_____________________________________________ > >> >> >> --- >> This email is free from viruses and malware because avast! Antivirus >> protection is active. >> http://www.avast.com >> >>_____________________________________________ > >> To subscribe/unsubscribe go to >> http://www.rhodes22.org/mailman/listinfo/rhodes22-list >> >> For the list Charter and help with using the mailing list and archives >> go >> to http://www.rhodes22.org/list >>_____________________________________________ > >> > > > _____________________________________________ > > To subscribe/unsubscribe go to > http://www.rhodes22.org/mailman/listinfo/rhodes22-list > > For the list Charter and help with using the mailing list and archives go > to http://www.rhodes22.org/list > _____________________________________________ > > __________________________________________________ > To subscribe/unsubscribe go to > http://www.rhodes22.org/mailman/listinfo/rhodes22-list > > For the list Charter and help with using the mailing list and archives go > to http://www.rhodes22.org/list > __________________________________________________ >
To use your email application to send a messsage to the webmaster rather than this form, .
Your post is being sent... 