The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

jfn302 at yahoo.com



Lighting Rod

2014-03-11; 00:28:11 EDT

Member Since

2013-12-12

Posts: 66

Just a little math to show what I am referring to.

Air is about 3000V/mm or about 3,000,000V/M.  Assuming 10 meters of aluminum
mast is perfect conduction just for ease, but in reality aluminum is only a
reasonable conductor used mostly for its durability rather than its ability
to conduct.  That means the lightning can bypass 30,000,000 volts worth of
air passage.  However, once it reaches the fiberglass hull, 1 meter of
fiberglass is requires 20,000,000 V to transverse, and with the hull's
circumference to the waterline being about 9 feet (or 3 meters) that means
there is 60,000,000 V increased requirements to pass through the hull.

If the direct line distance from the tip of the mast to the water line is 12
meters, we're talking about 36,000,000 V to traverse that leap.
The same distance through the mast and then hull requires the lightning to
use 60,000,000 V.  

So it just makes sense that the lightning won't pass through the hull unless
there is something wrong with the integrity of the hull.

A more likely scenario for a boat in well maintained condition would be that
the lightning might use the mast to bypass 10 meters of air, then make a
leap into the air again at the base of the mast around the side of the boat
to the water, saving a net of 7 meters of air passage.  I could see the mast
being seriously damaged in that situation and probably the connection to the
hull at the foot of the mast as well.

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting