< prior
Back to Month
Go to Thread
2014-05-05; 22:48:31 EDT
Member Since
2008-02-18
Posts: 319
Thanks,Ken. Jerry Hi JerrySee the original archive post
> Just about to unwrap (still in 40’s) warmer weather is forecast and dock > is in. > its been two full seasons (i think) and no real issues. I should have > worked on the main stringers while the sole was up > as there were a few soft spots that could have used some penetrating > liquid repair stuff. my bilge is always dry so its not progressing any. I > was a bit shy on alcohol (for epoxy cleanup) wouldn’t waste good rum on > cosmetics. > there is a tiny bit of rubbing (creaking) between the privacy bulkhead and > the counter when heeled. but i don’t think thats my fault. > Ken > On May 5, 2014, at 12:00 PM, rhodes22-list-request at rhodes22.org wrote: > >> Send Rhodes22-list mailing list submissions to >> rhodes22-list at rhodes22.org >> >> To subscribe or unsubscribe via the World Wide Web, visit >> http://www.rhodes22.org/mailman/listinfo/rhodes22-list >> or, via email, send a message with subject or body 'help' to >> rhodes22-list-request at rhodes22.org >> >> You can reach the person managing the list at >> rhodes22-list-owner at rhodes22.org >> >> When replying, please edit your Subject line so it is more specific >> than "Re: Contents of Rhodes22-list digest..." >> >> >> Today's Topics: >> >> 1. Re: Traveler height (Rick) >> 2. Re: I'm Moving (Stephen Staum) >> 3. Re: Traveler height (Stephen Staum) >> 4. Re: swing keel help (Ken Bates) >> 5. Re: swing keel help (Christopher Greco) >> 6. Motor Lift Wiring Question (Mrbabs) >> 7. Re: Motor Lift Wiring Question (James Nichols) >> 8. Re: I'm Moving (butterchurn) >> 9. Re: I'm Moving (R22RumRunner at aol.com) >> 10. Re: Swing keel help (Ric Stott) >> 11. Re: Motor Lift Wiring Question (Lowe, Rob) >> 12. [Fwd: Ken Bates] (cjlowe at sssnet.com) >> 13. [Fwd: Pop-top encloseure repair] (cjlowe at sssnet.com) >> >> >> ---------------------------------------------------------------------- >> >> Message: 1 >> Date: Sun, 4 May 2014 13:37:23 -0400 >> From: Rick <sloopblueheron at gmail.com> >> Subject: Re: [Rhodes22-list] Traveler height >> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> >> Message-ID: >> <CABkv36YfPhug_s3OG1GwmuNkAKCdjHY_dJdjKmT5RA+Sc2tTrQ at mail.gmail.com> >> Content-Type: text/plain; charset=UTF-8 >> >> Bill, >> >> I don't think it would matter much if the sheet block is always in the >> center. Sheet tension will just have to be a little more overdone on a >> reach. >> >> Maybe a new hat would be easier. >> >> Rick >> >> >> On Sun, May 4, 2014 at 11:01 AM, Bill Pauer <billpauer at gmail.com> wrote: >> >>> Can I raise the bar of my traveler? As you can see it is interfering >>> with >>> my comfort. I don't have a tape out here this morning but I am >>> estimating >>> that the bar is 16" off the gunnels. I had a '80 model and it seemed >>> to be >>> hire. I should also probably fess up that I really don't use the >>> traveler >>> properly. I have it set to the center and there it stays. >>> Thanks >>> Bill >>> PS >>> Great day to sail on Lake Keowee in SC. >>> >>> -------------- next part -------------- >>> A non-text attachment was scrubbed... >>> Name: image.jpeg >>> Type: image/jpeg >>> Size: 499712 bytes >>> Desc: not available >>> Url : >>> http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20140504/61bca49d/attachment.jpeg >>> -------------- next part -------------- >>> >>> >>> -------------- next part -------------- >>> A non-text attachment was scrubbed... >>> Name: image.jpeg >>> Type: image/jpeg >>> Size: 557811 bytes >>> Desc: not available >>> Url : >>> http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20140504/61bca49d/attachment-0001.jpeg >>> -------------- next part -------------- >>> >>> Sent from Bill's iPhone >>> __________________________________________________ >>> To subscribe/unsubscribe go to >>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list >>> >>> For the list Charter and help with using the mailing list and archives >>> go >>> to http://www.rhodes22.org/list >>> __________________________________________________ >>> >> >> >> ------------------------------ >> >> Message: 2 >> Date: Sun, 4 May 2014 13:41:23 -0400 >> From: Stephen Staum <snstaum at gmail.com> >> Subject: Re: [Rhodes22-list] I'm Moving >> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> >> Message-ID: <2CE701EC-A12B-428D-9E03-8BDBF612D1EC at gmail.com> >> Content-Type: text/plain; charset=us-ascii >> >> Close & in the water is best. >> >> 30 minute drive or less = much more sailing. >> >> Stephen Staum >> s/v Carol Lee 2 >> soon to be on a mooring 30 min from home in Quincy, MA >> >> Sent from my iPhone >> >> On May 3, 2014, at 9:51 PM, butterchurn <amazingmisterx at gmail.com> >> wrote: >> >>> Well some time ago, I said I wanted to move south. Well, I received a >>> call >>> from my previous employer asking me to come back. He really needs me. >>> So I >>> said I would. The only problem is it isn't south. It is in the wrong >>> direction. I will be going to Minneapolis. >>> >>> I have a choice of a number of lakes to give Ozone a new home. I could >>> put >>> her at Lake Pepin (the closest) on the Mississippi. It is about 2 miles >>> wide >>> and 23 miles long and the area is beautiful. I could go to Lake >>> Superior, >>> but it is 2.5 hours away. I could go to Lake Mille Lacs, but it is >>> primitive >>> as far as marinas go. >>> >>> Any thoughts or experiences with this area? >>> >>> Ron >>> >>> >>> >>> -- >>> View this message in context: >>> http://rhodes-22.1065344.n5.nabble.com/I-m-Moving-tp47915.html >>> Sent from the Rhodes 22 mailing list archive at Nabble.com. >>> __________________________________________________ >>> To subscribe/unsubscribe go to >>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list >>> >>> For the list Charter and help with using the mailing list and archives >>> go to http://www.rhodes22.org/list >>> __________________________________________________ >> >> >> >> ------------------------------ >> >> Message: 3 >> Date: Sun, 4 May 2014 13:52:39 -0400 >> From: Stephen Staum <snstaum at gmail.com> >> Subject: Re: [Rhodes22-list] Traveler height >> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> >> Message-ID: <0F4A6818-BB76-4FF7-84D3-49CC11904DEC at gmail.com> >> Content-Type: text/plain; charset=us-ascii >> >> >> Mine is similar height - but does not bother my head. I must sit >> differently @ the helm. A good rigger may be able to raise it for you. >> My question would be re the main sheet geometry afterward & will it >> affect performance. >> >> Stephen Staum >> s/v Carol Lee2 >> Needham, MA >> Sent from my iPhone >> >> On May 4, 2014, at 11:01 AM, Bill Pauer <billpauer at gmail.com> wrote: >> >>> Can I raise the bar of my traveler? As you can see it is interfering >>> with my comfort. I don't have a tape out here this morning but I am >>> estimating that the bar is 16" off the gunnels. I had a '80 model and >>> it seemed to be hire. I should also probably fess up that I really >>> don't use the traveler properly. I have it set to the center and there >>> it stays. >>> Thanks >>> Bill >>> PS >>> Great day to sail on Lake Keowee in SC. >>> >>> -------------- next part -------------- >>> A non-text attachment was scrubbed... >>> Name: image.jpeg >>> Type: image/jpeg >>> Size: 499712 bytes >>> Desc: not available >>> Url : >>> http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20140504/61bca49d/attachment.jpeg >>> -------------- next part -------------- >>> >>> >>> -------------- next part -------------- >>> A non-text attachment was scrubbed... >>> Name: image.jpeg >>> Type: image/jpeg >>> Size: 557811 bytes >>> Desc: not available >>> Url : >>> http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20140504/61bca49d/attachment-0001.jpeg >>> -------------- next part -------------- >>> >>> Sent from Bill's iPhone >>> __________________________________________________ >>> To subscribe/unsubscribe go to >>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list >>> >>> For the list Charter and help with using the mailing list and archives >>> go to http://www.rhodes22.org/list >>> __________________________________________________ >> >> >> >> ------------------------------ >> >> Message: 4 >> Date: Sun, 4 May 2014 15:21:51 -0400 >> From: Ken Bates <btskend at gmail.com> >> Subject: Re: [Rhodes22-list] swing keel help >> To: rhodes22-list at rhodes22.org >> Message-ID: <0DDB6A1F-0E4E-4AC3-8C80-B40B9E131C09 at gmail.com> >> Content-Type: text/plain; charset=windows-1252 >> >> Chris >> The ?stay set? adds friction when changing radius, independent of keel >> weight ( which is quite light for 1/4 nylon with 4 to 1?) Flexible = >> low friction in the blocks, stiff = higher friction. IT will be >> noticeable, try it before you put the cap back on. >> ken >> On May 4, 2014, at 12:00 PM, rhodes22-list-request at rhodes22.org wrote: >> >>> Swing keel help >> >> >> >> ------------------------------ >> >> Message: 5 >> Date: Sun, 4 May 2014 16:49:34 -0400 >> From: Christopher Greco <chrissailorman at gmail.com> >> Subject: Re: [Rhodes22-list] swing keel help >> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> >> Message-ID: >> <CAKCST+57XH_29q3D7QsqPjVP6Anr23p9su1=X_z+46GoeDV-SQ at mail.gmail.com> >> Content-Type: text/plain; charset=UTF-8 >> >> Makes sense...so you are saying sta-set is ok vs sta-set x.... I was >> thinking amsteel dyneema....mainly for strength...but dont know how >> flexible it is....will check both tomorrow. Stan said to use something >> pre-stretched. .. >> On May 4, 2014 3:22 PM, "Ken Bates" <btskend at gmail.com> wrote: >> >>> Chris >>> The ?stay set? adds friction when changing radius, independent of keel >>> weight ( which is quite light for 1/4 nylon with 4 to 1?) Flexible = >>> low >>> friction in the blocks, stiff = higher friction. IT will be noticeable, >>> try >>> it before you put the cap back on. >>> ken >>> On May 4, 2014, at 12:00 PM, rhodes22-list-request at rhodes22.org wrote: >>> >>>> Swing keel help >>> >>> __________________________________________________ >>> To subscribe/unsubscribe go to >>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list >>> >>> For the list Charter and help with using the mailing list and archives >>> go >>> to http://www.rhodes22.org/list >>> __________________________________________________ >>> >> >> >> ------------------------------ >> >> Message: 6 >> Date: Sun, 4 May 2014 19:13:48 -0700 (PDT) >> From: Mrbabs <Marc at babineauins.com> >> Subject: [Rhodes22-list] Motor Lift Wiring Question >> To: rhodes22-list at rhodes22.org >> Message-ID: <1399256028875-47925.post at n5.nabble.com> >> Content-Type: text/plain; charset=us-ascii >> >> Hello fellow Rhodies - hoping one of the brilliant electricians can >> answer a >> question. >> >> I have a rocker switch mounted in the cockpit that operates the motor >> lift. >> Well it used to operate the lift but now does nothing. >> >> I tested the winch by jumping direct from a battery to confirm the winch >> is >> working. I removed the switch, disassembled and saw evidence of some >> minor >> arcing so I ordered a replacement. BUT, the wire running from the >> positive >> post in the lazarette has a block of some type attached to the terminal. >> It's about one inch square with a rusted metal cover. Does anyone know >> what >> this gizmo is? A relay or fuse? >> >> Based on its condition, I'm thinking I should probably replace it while >> I'm >> changing out the switch. Any ideas what it is and what I need to order? >> >> Thank you! >> >> Marc B >> >> S/V Baby Steps >> East Greenwich, RI >> >> >> >> -- >> View this message in context: >> http://rhodes-22.1065344.n5.nabble.com/Motor-Lift-Wiring-Question-tp47925.html >> Sent from the Rhodes 22 mailing list archive at Nabble.com. >> >> >> ------------------------------ >> >> Message: 7 >> Date: Sun, 4 May 2014 21:38:32 -0500 >> From: "James Nichols" <jfn302 at yahoo.com> >> Subject: Re: [Rhodes22-list] Motor Lift Wiring Question >> To: "'The Rhodes 22 Email List'" <rhodes22-list at rhodes22.org> >> Message-ID: <000601cf680b$1b6b4ea0$5241ebe0$@yahoo.com> >> Content-Type: text/plain; charset="us-ascii" >> >> Most likely it is an overload relay. But if you could provide a picture >> we >> could be sure. >> >> James >> >> -----Original Message----- >> From: rhodes22-list-bounces at rhodes22.org >> [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of Mrbabs >> Sent: Sunday, May 4, 2014 9:14 PM >> To: rhodes22-list at rhodes22.org >> Subject: [Rhodes22-list] Motor Lift Wiring Question >> >> Hello fellow Rhodies - hoping one of the brilliant electricians can >> answer a >> question. >> >> I have a rocker switch mounted in the cockpit that operates the motor >> lift. >> Well it used to operate the lift but now does nothing. >> >> I tested the winch by jumping direct from a battery to confirm the winch >> is >> working. I removed the switch, disassembled and saw evidence of some >> minor >> arcing so I ordered a replacement. BUT, the wire running from the >> positive >> post in the lazarette has a block of some type attached to the terminal. >> It's about one inch square with a rusted metal cover. Does anyone know >> what >> this gizmo is? A relay or fuse? >> >> Based on its condition, I'm thinking I should probably replace it while >> I'm >> changing out the switch. Any ideas what it is and what I need to order? >> >> Thank you! >> >> Marc B >> >> S/V Baby Steps >> East Greenwich, RI >> >> >> >> -- >> View this message in context: >> http://rhodes-22.1065344.n5.nabble.com/Motor-Lift-Wiring-Question-tp47925.ht >> ml >> Sent from the Rhodes 22 mailing list archive at Nabble.com. >> __________________________________________________ >> To subscribe/unsubscribe go to >> http://www.rhodes22.org/mailman/listinfo/rhodes22-list >> >> For the list Charter and help with using the mailing list and archives >> go to >> http://www.rhodes22.org/list >> __________________________________________________ >> >> >> >> ------------------------------ >> >> Message: 8 >> Date: Sun, 4 May 2014 19:56:13 -0700 (PDT) >> From: butterchurn <amazingmisterx at gmail.com> >> Subject: Re: [Rhodes22-list] I'm Moving >> To: rhodes22-list at rhodes22.org >> Message-ID: <1399258573067-47927.post at n5.nabble.com> >> Content-Type: text/plain; charset=us-ascii >> >> I will keep her at Hamson's Marina on Lake Pepin. In the mean time, this >> summer I will still be on Lake Erie. >> >> >> >> -- >> View this message in context: >> http://rhodes-22.1065344.n5.nabble.com/I-m-Moving-tp47915p47927.html >> Sent from the Rhodes 22 mailing list archive at Nabble.com. >> >> >> ------------------------------ >> >> Message: 9 >> Date: Mon, 5 May 2014 07:35:11 -0400 (EDT) >> From: R22RumRunner at aol.com >> Subject: Re: [Rhodes22-list] I'm Moving >> To: rhodes22-list at rhodes22.org >> Message-ID: <ff0e.7bda4966.4098d16f at aol.com> >> Content-Type: text/plain; charset="US-ASCII" >> >> Lake Pepin is a great place to sail. My first experience on a catamaran >> was >> on Lake Pepin in 1983. >> >> Rummy >> >> >> >> In a message dated 5/4/2014 10:56:23 P.M. Eastern Daylight Time, >> amazingmisterx at gmail.com writes: >> >> I will keep her at Hamson's Marina on Lake Pepin. In the mean time, >> this >> summer I will still be on Lake Erie. >> >> >> >> -- >> View this message in context: >> http://rhodes-22.1065344.n5.nabble.com/I-m-Moving-tp47915p47927.html >> Sent from the Rhodes 22 mailing list archive at Nabble.com. >> __________________________________________________ >> To subscribe/unsubscribe go to >> http://www.rhodes22.org/mailman/listinfo/rhodes22-list >> >> For the list Charter and help with using the mailing list and archives >> go >> to http://www.rhodes22.org/list >> __________________________________________________ >> >> >> >> ------------------------------ >> >> Message: 10 >> Date: Mon, 5 May 2014 09:11:20 -0400 >> From: Ric Stott <ric at steelbone.com> >> Subject: Re: [Rhodes22-list] Swing keel help >> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> >> Message-ID: <16C99E14-6900-44A4-AC4E-6053E831FA0A at steelbone.com> >> Content-Type: text/plain; charset=US-ASCII; format=flowed; delsp=yes >> >> I used some 1/4 low stretch that I had already- It's not stay set, but >> I'm not sure what it is. it works and it was free. >> I didn't have to replace blocks, but the two blocks mounted under the >> cap were attached with 3" long #12 bolts that stuck up through the cap >> and were covered with white silicone. I took a guess at how these >> should be attached and waterproof - hope it works. >> two weeks to launch. >> Ric >> s/v Dadventure >> >> >> >> >> >> On May 3, 2014, at 10:37 PM, chrissailorman wrote: >> >>> Fine job Ric...what line did you use? And did you replace any of the >>> blocks? >>> Haven't been able to locate exact replacements for the ones attached >>> to the >>> centerboard.... Spoke with Stan and he offered some alternatives. >>> >>> >>> >>> ----- >>> Chris Greco >>> Long Island, NY >>> Great South Bay >>> 1986 Rhodes 22, Blue Hawaii >>> -- >>> View this message in context: >>> http://rhodes-22.1065344.n5.nabble.com/Swing-keel-help-tp47899p47917.html >>> Sent from the Rhodes 22 mailing list archive at Nabble.com. >>> __________________________________________________ >>> To subscribe/unsubscribe go to >>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list >>> >>> For the list Charter and help with using the mailing list and >>> archives go to http://www.rhodes22.org/list >>> __________________________________________________ >> >> >> >> ------------------------------ >> >> Message: 11 >> Date: Mon, 5 May 2014 10:31:39 -0400 >> From: "Lowe, Rob" <rlowe at vt.edu> >> Subject: Re: [Rhodes22-list] Motor Lift Wiring Question >> To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> >> Message-ID: >> <20DE79EA3783484A94EF626CFBEB95B3582D2DC172 at rivendell.cc.w2k.vt.edu> >> Content-Type: text/plain; charset="us-ascii" >> >> Marc, >> I'm going to guess an inline fuse or fusible link. I've got the same >> arrangement, but don't recall seeing this on mine. Perhaps it is a fuse >> and that's why your switch is not working? - rob >> >> -----Original Message----- >> From: rhodes22-list-bounces at rhodes22.org >> [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of Mrbabs >> Sent: Sunday, May 04, 2014 10:14 PM >> To: rhodes22-list at rhodes22.org >> Subject: [Rhodes22-list] Motor Lift Wiring Question >> >> Hello fellow Rhodies - hoping one of the brilliant electricians can >> answer a question. >> >> I have a rocker switch mounted in the cockpit that operates the motor >> lift. >> Well it used to operate the lift but now does nothing. >> >> I tested the winch by jumping direct from a battery to confirm the winch >> is working. I removed the switch, disassembled and saw evidence of some >> minor arcing so I ordered a replacement. BUT, the wire running from the >> positive post in the lazarette has a block of some type attached to the >> terminal. >> It's about one inch square with a rusted metal cover. Does anyone know >> what this gizmo is? A relay or fuse? >> >> Based on its condition, I'm thinking I should probably replace it while >> I'm changing out the switch. Any ideas what it is and what I need to >> order? >> >> Thank you! >> >> Marc B >> >> S/V Baby Steps >> East Greenwich, RI >> >> >> >> -- >> View this message in context: >> http://rhodes-22.1065344.n5.nabble.com/Motor-Lift-Wiring-Question-tp47925.html >> Sent from the Rhodes 22 mailing list archive at Nabble.com. >> __________________________________________________ >> To subscribe/unsubscribe go to >> http://www.rhodes22.org/mailman/listinfo/rhodes22-list >> >> For the list Charter and help with using the mailing list and archives >> go to http://www.rhodes22.org/list >> __________________________________________________ >> >> >> >> ------------------------------ >> >> Message: 12 >> Date: Mon, 5 May 2014 11:29:46 -0400 (EDT) >> From: cjlowe at sssnet.com >> Subject: [Rhodes22-list] [Fwd: Ken Bates] >> To: rhodes22-list at rhodes22.org >> Message-ID: >> <49271.24.140.30.102.1399303786.squirrel at quickpop.sssnet.com> >> Content-Type: text/plain;charset=iso-8859-1 >> >> ---------------------------- Original Message >> ---------------------------- >> Subject: Ken Bates >> From: cjlowe at sssnet.com >> Date: Sun, May 4, 2014 4:56 pm >> To: rhodes-22list at rhodes-22.org >> -------------------------------------------------------------------------- >> >> I'm starting the same mast -cabin floor repair you did, and so nicely >> documented. Have you sailed her yet? Is there anything you would do >> differently? If you think of anything, I'm all ears. >> >> Thanks, >> >> Jerry Lowe >> >> >> >> >> >> >> ------------------------------ >> >> Message: 13 >> Date: Mon, 5 May 2014 11:30:53 -0400 (EDT) >> From: cjlowe at sssnet.com >> Subject: [Rhodes22-list] [Fwd: Pop-top encloseure repair] >> To: rhodes22-list at rhodes22.org >> Message-ID: >> <49278.24.140.30.102.1399303853.squirrel at quickpop.sssnet.com> >> Content-Type: text/plain;charset=iso-8859-1 >> >> ---------------------------- Original Message >> ---------------------------- >> Subject: Pop-top encloseure repair >> From: cjlowe at sssnet.com >> Date: Sat, May 3, 2014 11:51 pm >> To: rhodes-22list at rhodes-22.org >> -------------------------------------------------------------------------- >> >> My 10+ year old PTE was starting to come apart at the seams. the thread >> on >> both zippers on the door were streached tight and missing in the top >> couple inches on both sides. Where the PTE goes around the mast was >> showing the same wear. I took it to the closest Amish tarp and canvas >> shop. I told the tarp guy that I'd like to make it last a year or two >> more >> if I could. He told me that this material shrinks after a decade of >> abuse, >> and he would add 3/4" of new canvas on each side of the zippers on the >> door and put a patch on the hole at the mast. Hoping to keep the price >> down, I told him I was more concerned about protection than perfection. >> He >> didn't see it that way. I picked it up today, and It looked great. As he >> reached for the work order, I braced myself. He said, including tax,that >> will be $ 17.21. I handed him a 20 $ bill, said thanks, and left a very >> happy customer. He even cleaned the whole PTE and except for scratches >> on >> the windows It looked new. >> >> Jerry Lowe >> >> >> >> >> >> >> ------------------------------ >> >> _______________________________________________ >> Rhodes22-list mailing list >> Rhodes22-list at rhodes22.org >> http://www.rhodes22.org/mailman/listinfo/rhodes22-list >> >> >> End of Rhodes22-list Digest, Vol 3460, Issue 1 >> ********************************************** > > > __________________________________________________ > To subscribe/unsubscribe go to > http://www.rhodes22.org/mailman/listinfo/rhodes22-list > > For the list Charter and help with using the mailing list and archives go > to http://www.rhodes22.org/list > __________________________________________________ >
To use your email application to send a messsage to the webmaster rather than this form, .
Your post is being sent... 