2014-07-11; 19:40:56 EDT
Member Since
2014-05-06
Posts: 3821
First a “thank you” to Rummy for taking this picture and sharing it. I always wanted a shot of the boat underway. A second thank you to the critical friends who pointed out a number of things I should be aware of. I didn’t realize the strain I felt on the tiller was caused by the rudder not being fully down. I sometimes skull the boat into my dock and found I got improved forward motion with the rudder in this position. Thanks to the adjustments I can easily move it down to the lowest position under sail. If I wasn’t there I would agree with those observations about the jib. It’s hard to believe that the shape of the jib is concave and not convex as it looks in the picture. I was on a port tack in winds forecasted at 10 to 18 mph. Probably running less than 10 in the picture. I agree the anchor looks a bit precarious hanging like that especially with the extra weight of the chain on it. I wanted to be able to release it quickly when I anchored. I would store it on the deck but think it might interfere with the jib coming across. Any thoughts? I lower the topping lift to the level that allows the main to “sally forth” easily. I should then release it all the way as some have pointed out. This was taken in the morning just as I was starting out. Later in the day, I let both main and jib out to enjoy those broad reach moments equivalent to a downhill skier on a double black diamond run. I had to have both hands on the tiller at times partly (I know now) due to the high rudder position. Thanks again for the picture and feedback. I like the “what’s wrong with this picture” question for the help and humour it generated. Joe Riley s/v Second Wind Lake Hartwell -- View this message in context: http://rhodes-22.1065344.n5.nabble.com/response-from-Joe-tp48346.html Sent from the Rhodes 22 mailing list archive at Nabble.com.See the original archive post