2014-07-31; 21:33:36 EDT
Member Since
2014-05-06
Posts: 3821
Hi Graham - It may be time to find another boat project - or just take some time to float around in another boat. Give the Rhodes' keel time to dry out. You can help it along by making a skirt around the keel and adding heat - see if you can get the keel a little north of 100 degrees and hold it there for a few days - can you borrow or rent infrared heater(s)? If you use a kerosene, oil, or gas heater, vent the heater's exhaust outside the skirt. Water is a by-product of combustion, and may slow or stop the drying process. I know a contractor who tried to dry out wet ground to meet a paving deadline by strapping a jet engine to the back of a bulldozer - literally! It didn't end well. Keep a tarp over the boat, not only to keep out rain, but also to prevent dew from condensing on interior surfaces. Add a fan in the cabin to move any accumulated moisture out of the boat. Keep the keel warm for a few days (a week if you want to be conservative), and you should be good to go. I wish I could suggest a way to verify the keel had dried out, but I'm coming up empty thinking about it. Good luck - thanks for keeping us posted. Dennis Magic Moments Anxiously awaiting the bits for the mast lowering rackSee the original archive post