2014-08-30; 07:20:56 EDT
Member Since
2014-05-06
Posts: 3821
Steve, It has been my experience that if the rudder is in the full down (meaning forward) position, it will not come in contact with the prop. Rummy In a message dated 8/29/2014 8:45:45 A.M. Eastern Daylight Time, rhodes22-list at rhodes22.org writes: Chris, I installed Tohatsu's "Elephant Ear" high-thrust prop, 8.4" dia/6" pitch, on our Tohatsu 6 HP 4 stroke, replacing the standard 7.7" dia/8" pitch prop. I didn't notice much difference in performance other than, perhaps, an increase in boat vibration. I reinstalled the standard prop. We have, however, a set of "Power Thruster" stainless steel ears on the motor, which I installed mostly to prevent the rudder from being sucked into the spinning prop when I inevitably drop the tiller at an inopportune time. They work well, and we may already be getting any advantages of the high-thrust prop. (If you Google "Power Thruster, you'll get a few non-nautical responses.") Steve Granville, Oh -----Original Message----- From: rhodes22-list-bounces at rhodes22.org [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 Email List Sent: Thursday, August 28, 2014 10:03 PM To: rhodes22-list at rhodes22.org Subject: [Rhodes22-list] HIGH THRUST PROP? Was just reading about propeller selection and the advantages of using a high thrust prop. Said low pitch, and larger blade provided more thrust at slow and high speed, less prop walk due to lower pitch, and better reverse handling. Anyone with experience with this issue? I currently am using a 6 hp, 4 stroke, Mercury with a standard 3 blade, medium pitch, narrow blade prop. Is it worth switching to maybe 4 blade or 3 blade, high thrust model? Appreciate your advice. Chris Greco ----- Chris Greco Long Island, NY Great South Bay 1987 Rhodes 22, Blue Hawaii -- View this message in context: http://rhodes-22.1065344.n5.nabble.com/HIGH-THRUST-PROP-tp48486.html Sent from the Rhodes 22 mailing list archive at Nabble.com.See the original archive post