2014-09-01; 12:27:20 EDT
Member Since
2014-05-06
Posts: 3821
You all are making this too difficult. Remember Stan does things for reasons and keeps it simple, for us of simple minds. The slotted attachments of the bunks aren't meant to be tightened. Just allow the bunks to move for when the boat is there and when it isn't. The boat will be in slightly different places each time and thus the bunks will curve slightly different each time. The deflections in the hull will disappear when the boat is in the water. When loading the boat, do not extend the stop, keep it all the way forward, bring the boat as tight to there as you can. When driving out if the water, the natural shift of the boat onto the trailer will result in the boat being as far forward as it should. The tongue weight will be minimal, but there should be some. If you have a negative tongue weight, put the boat back in the water and reload. After loading, extend the stop to the boat and tighten. This will help to minimize boat bounce while running down the road. Hope that helps. ---- Charles Nieman s/ Daydream 98 R 22 Sent with HotmailBuzzr On Sep 1, 2014, 9:27 AM, The Rhodes 22 Email List wrote: The trailer when I bought it had 2 2x6 boards on each side on top of each other with carriage bolts going thru. I kept same arrangement when I replaced them last year with treated boards and outdoor carpet. One of the old boards I found to be cracked at a support where I noticed slight indent in hull. -- Steve ----- Fair winds and following seas ..... Steve Raye -- View this message in context: http://rhodes-22.1065344.n5.nabble.com/Re-How-s-y our-keel-work-progressing-tp48397p48512.html Sent from the Rhodes 22 mailing list archive at Nabble.com.See the original archive post