2014-10-29; 16:38:04 EDT
Member Since
2014-05-06
Posts: 3821
Graham,I have been all over these archives reading your posts. My Rhodes is a 1974 and it looks like there are alot of similarities between our boats.
I am curious how you would have fixed your deck without removing it. Would you have done like on the cabin sides and drilled every 4 inches? What I'm thinking you are doing here is drilling in a grid and then forcing epoxy into the holes and it fills voids in between the holes?? Any ideas on how to support the deck so I could maintain its original shape???
The deck is my main concern right now. My secondary concern is the severe gelcoat cracking.
I think I have the floor thing down with the bracing. My other worry though is that all the cleats are plastic. In your adventures, did you find backing plates on any of these?? If not, I think I can make that cabin liner look like swiss cheese in a hurry!!!
Brad Bachelor
Marrying an old bachelor is like buying second-hand furniture. -- Helen Rowland 1875-1950, American Journalist
From: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
To: 'The Rhodes 22 Email List' <rhodes22-list at rhodes22.org>
Sent: Wednesday, October 29, 2014 2:47 PM
Subject: Re: [Rhodes22-list] My new toy.... Talk me into saving it
Hi Brad:
I imagine that you are disappointed to find the boat in the condition it is
in.
My boat is a 76 and I have had to address all of the problems you listed and
a few more that might still be there to discover. I am into my 4th year of
reconstruction - recognizing two limiting factors - 1, I am in Ontario and
have only a few months each year when I can work on the boat and 2, I am
massively slow in part because I knew nothing about fixing the boat when I
started so much of this was a learning experience. A third factor which I
should also admit to is that I did just about everything at least twice -
and always the hard way. If you decide to proceed with this project I might
be able to at least point out my rich and varied history of mistakes.
Even without my limitations though it is a big, big project. My advice would
be that unless you really enjoy the process of reconstruction, don't do it.
I am one of those perverse types who really loves to do the work and get
great satisfaction from it even when I am hanging upside down sanding epoxy
in 90 degree weather for hours. But if you are doing this just because you
want a boat, chances are that the cost and effort will take its toll long
before the boat is ready. It is very easy to grossly underestimate the cost
of reconstruction. I wouldn't dare let my wife see my records.
Most of my reconstruction efforts are included in various postings to the
list and if you search the archive under my name you will find discussion on
how I fixed the sunken deck, repaired the keel, centreboard and rudder,
ground out the gelcoat cracks and painted the deck, reinforced the cabin
sides, and so forth. I am currently replacing the ports with tinted
Plexiglas strips which I hope to be able to attach without hardware. I have
the Plexiglas but the attachment will not occur now until spring. At that
point I will be rebuilding the entire inside of the boat including the floor
stringers, bulkheads, galley and head area - for the second time. Of course
there were tens of thousands of minor things I did along the way or still
await my attention like installing new chainplates, rub rail, pulpits, paint
the interior and so forth. My ultimate goal is to complete the boat before I
die. Right now it seems to be a tossup as to which will occurs first.
Feel free to ask if I can be of any assistance.
Graham Stewart
gstewart8 at cogeco dot ca
See the original archive post