The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

The Rhodes 22 Email List



Urgent centerboard gasket questions

2014-11-08; 07:04:49 EST

Member Since

2014-05-06

Posts: 3821

Glad it worked for you. 
 
 
In a message dated 11/7/2014 5:07:11 P.M. Eastern Standard Time,  
rhodes22-list at rhodes22.org writes:

Hey  Rummy, same thing happened to me....my cb cap was fastened with about 
10 bolts  with nuts, the rest were 10 or 12 ga, ss sheet metal screws... 

What I  did was, working one at a time, remove the sheet metal screw, 
drilled out the  hole through top and bottom of flange and replaced it with a 1/4 
x 1 1/2" hex  head bolt and nut, with washers, ss of course. This allowed a 
controlled leak  with a minimum of water and allowed me to replace all of 
them,  then  drawing each snugly, compressing the gasket sufficiently to 
prevent leakage.  Slept well that night, there were about 60 screws to replace. 
Boat has  remained perfectly dry the entire season. 

Sent from my  iPad

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting