The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

The Rhodes 22 Email List



deck mounted chain plates

2015-01-10; 21:18:05 EST

Member Since

2014-05-06

Posts: 3821

Graham,

The idea is to set the rig tension while the sails are down / furled. Take a
look midway down the page at http://loosnaples.com/how-tos/tension-gauges to
see Loos' suggested variation in shroud tension as the boat heels. I suspect
something similar happens in the forestay / backstays.

The picture shows that a rig that's too loose loses all support in the
leeward shrouds, and notes that "The lateral stiffness of the mast and the
fore and aft stiffness of the spreaders is reduced by a factor of 2 when the
leeward shrouds go slack".

Dennis
Magic Moments
Wondering if rig tension should be reduced in sub-zero temps.


See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting