The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

The Rhodes 22 Email List



Centerboard cap

2015-01-15; 09:38:21 EST

Member Since

2014-05-06

Posts: 3821

I used 1/4" bolts, washers and lock nuts. In my case the cap was sealed with
something like 3M 5200, the cap was riveted on and then the whole thing was
covered with fibreglass cloth! Fortunately the fibreglass was applied so
badly it wasn't difficult to remove. In removing the cap it was badly
damaged as was the centreboard trunk join face so I had to fabricate and
attach a 1/8" aluminium surface with epoxy paste and rivets to create a
smooth face. None of that should  be necessary in your case.

Graham 

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting