2015-01-16; 12:47:35 EST
Member Since
2014-05-06
Posts: 3821
Bob: If all you want to do is run a bead of sealant along the join then you do not need to remove the rub rail. But expect to have to redo that fix on a regular basis. If you want to seal the joint "permanently", you need to remove the rail and the rivets that join the deck to the hull in order to drive wedges into the join thereby opening it up in order to remove the old stuff and inject the new. We had a full discussion about this not long ago and Rummy posted detail instructions and a suggestion for a good sealant. It would be well worth looking up his post in the archives. GrahamSee the original archive post