The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

The Rhodes 22 Email List



Soul of the sole - and Stan's info

2015-01-17; 12:12:43 EST

Member Since

2014-05-06

Posts: 3821

Thanks Rick. 

I didn't think this would be such a difficult question but given that a
number of us are in the process of rebuilding the floor structure and others
have had to do so in the past, it would be great to get a definitive answer
about how the boats of different vintage were built, or should be built.

I think, however, I have found my answer from a message that Stan posted on
June 5, 2013 with the subject "Educational Rebuttal" in which he very
helpfully detailed much of the evolution of the R22 over the years. Here is
the section of that message dealing with hull stiffness and floor stringers:

"In those days of simplified pricing, it was by the pound - glass and resin
used.  The lighter the boat the more competitive, price wise. The Ventures
came along and made this building, an art form.  In water it did not seem to
matter - on land the art form had its weak points, particularly on trailers.
In my fifties standing in the lazaret, feeling the flexing hull bottom
underfoot, was unnerving. Molding the Rhodes keel as an integrated part of
the hull itself, made the Rhodes mid-ship bottom, naturally stiff, whereas
competitive boats bolted on their keels.  Few boats had flotation. Those
that did accomplished it with chunks of bought foam planks, as we ourselves
did - in our early days; until it dawned on us to marry the two by molding
the foam to fit the hull, then glass it in to stiffen the cockpit and bow
sections of the boat bottom.  It also dawned on us that a modest redesign of
the floor unit stringers and their glassing in, added more bottom stiffness.
By the time we moved the making of the hulls to our own shop, we had matured
enough to have given up on the price wars.  We started to lay up the port
side hull glass so it continued on across the bottom, and the starboard side
glass lay up so it too continued on across the bottom.   With the hull sides
extraordinarily stiff from the Rhodes unusual compound curved flared hull
shape, now its bottom was extraordinarily stiff from being twice the
thickness of the sides. The hulls we build today in our own facility are so
extraordinarily stiff that we lift the boats by their bow eye and transom
eyes and boat shape shows no deflection.  This amazing difference from our
early boats /is/ probably overkill because I do not know of any other
builder who moves their boats around supported at only its two extremes."

So it seems that hull stiffness is a good thing and that older boats might
benefit from glassed-in stringers more than the newer ones.

I wish Stan would write the book he keeps musing about. He is a great writer
and has a story to tell that few could equal.


Graham 



See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting