The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

The Rhodes 22 Email List



Soul of the sole - and Stan's info

2015-01-17; 16:40:21 EST

Member Since

2014-05-06

Posts: 3821

   Graham, et al,
   The stringer construction I described was in a 1974 hull.
   Todd T.
   --
   Sent from my Android phone with [1]mail.com Mail. Please excuse my
   brevity.

   The Rhodes 22 Email List <rhodes22-list at rhodes22.org> wrote:

     Thanks Rick.
     I didn't think this would be such a difficult question but given
     that a
     number of us are in the process of rebuilding the floor structure
     and others
     have had to do so in the past, it would be great to get a
     definitive answer
     about how the boats of different vintage were built, or should be
     built.
     I think, however, I have found my answer from a message that Stan
     posted on
     June 5, 2013 with the subject "Educational Rebuttal" in which he
     very
     helpfully detailed much of the evolution of the R22 over the years.
     Here is
     the section of that message dealing with hull stiffness and floor
     stringers:
     "In those days of simplified pricing, it was by the pound - glass
     and resin
     used. The lighter the boat the more competitive, price wise. The
     Ventures
     came along and made this building, an art form. In water it did not
     seem to
     matter - on land the art form had its weak points, particularly on
     trailers.
     In my fifties standing in the lazaret, feeling the flexing hull
     bottom
     underfoot, was unnerving. Molding the Rhodes keel as an integrated
     part of
     the hull itself, made the Rhodes mid-ship bottom, naturally stiff,
     whereas
     competitive boats bolted on their keels. Few boats had flotation.
     Those
     that did accomplished it with chunks of bought foam planks, as we
     ourselves
     did - in our early days; until it dawned on us to marry the two by
     molding
     the foam to fit the hull, then glass it in to stiffen the cockpit
     and bow
     sections of the boat bottom. It also dawned on us that a modest
     redesign of
     the floor unit stringers and their glassing in, added more bottom
     stiffness.
     By the time we moved the making of the hulls to our own shop, we
     had matured
     enough to have given up on the price wars. We started to lay up the
     port
     side hull glass so it continued on across the bottom, and the
     starboard side
     glass lay up so it too continued on across the bottom. With the
     hull sides
     extraordinarily stiff from the Rhodes unusual compound curved
     flared hull
     shape, now its bottom was extraordinarily stiff from being twice
     the
     thickness of the sides. The hulls we build today in our own
     facility are so
     extraordinarily stiff that we lift the boats by their bow eye and
     transom
     eyes and boat shape shows no deflection. This amazing difference
     from our
     early boats /is/ probably overkill because I do not know of any
     other
     builder who moves their boats around supported at only its two
     extremes."
     So it seems that hull stiffness is a good thing and that older
     boats might
     benefit from glassed-in stringers more than the newer ones.
     I wish Stan would write the book he keeps musing about. He is a
     great writer
     and has a story to tell that few could equal.
     Graham
See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting