< prior
Back to Month
Go to Thread
2015-02-09; 14:59:02 EST
Member Since
2014-05-06
Posts: 3821
I think it is The American Boat & Yacht Council, ABYC, not the AYBA . ---- The Rhodes 22 Email List <rhodes22-list at rhodes22.org> wrote:See the original archive post
> Graham, > > Take a look at AYBA book H-27 2014. > > On Casey, I was just referring to what you said about what he wrote. That > is, he discussed sealants in his book but later in his article realized it > is really about adhesives. > > Realize that making the joint rigid to prevent leaks transfers the stress > of flexing to areas of the deck and hull that are not designed to absorb > that much stress. In other words, you wind up with a boat that keeps > cracking in the wrong places forevermore. > > Rick > > > On Sun, Feb 8, 2015 at 9:05 PM, The Rhodes 22 Email List < > rhodes22-list at rhodes22.org> wrote: > > > Rick: > > Actually I did check the AYBA standards after you mentioned them before but > > could not find any reference to the matter of the hull-deck joint. Do you > > know if they address this directly? > > I don't know what to make of the comment about Casey not knowing the > > difference between a sealant and an adhesive. In the book I have he has a > > whole section on the topic. > > > > Graham > > > > -----Original Message----- > > From: rhodes22-list-bounces at rhodes22.org > > [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 > > Email > > List > > Sent: February-08-15 4:28 PM > > To: The Rhodes 22 Email List > > Subject: Re: [Rhodes22-list] New Joint of Deck and Hull from originator > > > > Hi Graham, > > > > Don Casey is a good writer for recreational sailing publications. However, > > I have never seen him write for the boat building industry, like Profession > > Boat Builder magazine. Yet it is a good thing that since writing the book > > you read, he now seems to know the difference between a sealant and an > > adhesive. > > > > If you want the advice of many who spend all their days doing it, check the > > ISO or AYBA standards. > > > > Rick > > > > On Sat, Feb 7, 2015 at 7:48 PM, The Rhodes 22 Email List < > > rhodes22-list at rhodes22.org> wrote: > > > > > Hi Chuy: > > > > > > The postings opposed to the idea of fixing the hull-deck join with > > > fibreglass lay-up were making me increasingly doubt the approach I > > > suggested. However, your reference to Don Casey's article in Sail > > > magazine prompted me to check the subject of hull-deck repairs in > > > Casey's book Sailboat Hull and Deck Repairs that I had read about 4 > > > years ago and had forgotten about. I knew that I had not just dreamt > > > up the idea of joining the hull and deck with fibreglass layup but I > > > could not remember where the idea originated. Casey gives detailed > > > instructions for sealing with 5200 and re-fastening where access to > > > the joint is not feasible. That said, he states the following: > > > > > > "FIBERGLASSING > > > THE BEST SOLUTION FOR A LEAKING HULL-to-deck joint is to join the two > > > parts permanently with fibreglass lay-up. This can be done either > > > inside or outside, depending on access and the design of the joint." > > > (Emphasis is in the original text.) > > > > > > In discussing types of joints, Casey says: "The best joints are > > > fibreglasses together into a single strong and leak-free unit, but few > > > are built this way. Most are joined mechanically with rivets, screws, > > > or bolts and depend on sealant to keep water out." > > > > > > In my case, getting access to the joint involved removing the covering > > > pads (a few screws), cutting back the lip of the liner, and removing > > > the wooden strip below the joint -all tasks that are much easier than > > > removing and replacing the rub rail and all of the hull-deck > > > fasteners. I removed my rub rail because I also had major deck core > > > replacement to do but had that not been the case I would have stayed with > > the inside glassing alone. > > > > > > At least now I can sleep knowing that I had not lost my mind or ruined > > > the boat. > > > > > > > > > Graham > > > > > > > > > > > > -----Original Message----- > > > From: rhodes22-list-bounces at rhodes22.org > > > [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 > > > Email List > > > Sent: February-06-15 1:14 AM > > > To: The Rhodes 22 Email List > > > Subject: [Rhodes22-list] New Joint of Deck and Hull from originator > > > > > > Hi ALL , > > > I received my special anniversary issue of Sail Magazine early in > > > the week but did not have time to read it., Volume 46 Number 2 February > > 2015. > > > Tonight I open it to the table of contents and guess what one of the > > > articles was about? Page 60, "Sealed up Tight When is comes to securing > > > the hull to deck, which method is best?" by Don Casey. > > > > > > The author states "Boat builders are increasingly relying on > > > high-strength methacrylate adhesives to fuse the hull to the deck into > > > a single, leak proof component, in some cases omitting mechanical > > fasteners all together". > > > Further he states that this process is expansive so some builders use > > > flexible adhesives to bond the deck and hull, like 5200. He goes on > > > and states that repairs on the joint are not treated as two halves, > > > since there is no reason to. In most cases the deck to hull repair is > > > done without a joint in the damaged area. > > > > > > The article is very well written and easy to follow. He explains the > > > different hull to deck joints used. Their strengths and weaknesses > > > and the reason to for their use. > > > > > > After reading the article, I think that I most of my ideas with a few > > > minor adjustments. > > > > > > Thanks for all your input. > > > > > > Chuy > > > AfterMath 1987 > > > __________________________________________________ > > > To subscribe/unsubscribe go to > > > http://www.rhodes22.org/mailman/listinfo/rhodes22-list > > > > > > For the list Charter and help with using the mailing list and archives > > > go to http://www.rhodes22.org/list > > > __________________________________________________ > > > > > > __________________________________________________ > > > To subscribe/unsubscribe go to > > > http://www.rhodes22.org/mailman/listinfo/rhodes22-list > > > > > > For the list Charter and help with using the mailing list and archives > > > go to http://www.rhodes22.org/list > > > __________________________________________________ > > > > > __________________________________________________ > > To subscribe/unsubscribe go to > > http://www.rhodes22.org/mailman/listinfo/rhodes22-list > > > > For the list Charter and help with using the mailing list and archives go > > to > > http://www.rhodes22.org/list > > __________________________________________________ > > > > __________________________________________________ > > To subscribe/unsubscribe go to > > http://www.rhodes22.org/mailman/listinfo/rhodes22-list > > > > For the list Charter and help with using the mailing list and archives go > > to http://www.rhodes22.org/list > > __________________________________________________ > > > __________________________________________________ > To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list > > For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list > __________________________________________________
To use your email application to send a messsage to the webmaster rather than this form, .
Your post is being sent... 