2015-03-26; 21:00:44 EDT
Member Since
2014-05-06
Posts: 3821
Hi Alex, To put your mind at rest a bit - I think I'm the one you're referring to about the CB cap leak. It was due to a faulty DB refurbish job at a marina. Had they done the job as they should, there would not have been a leak. They used a ton of silicone to seal it and forgot to tighten about 10 of the bolts. Silicone in untightened area had hardened and formed gap so even when I tightened the bolts, the water leaked through. Advice here is to just install cap with just the neoprene gasket and no sealant - so you can take it off for any required repairs in future. As part of the helpful advice on the list I learned that many had done the refurbish job and had zero leaks afterward. BTW: Even with that problem and the pain of fixing it I've fallen in love - and I've had a lot of boats, big and small. I'd buy the Rhodes 22 just for the swim ladder, cockpit, cabin, uh, guess the list would have to go on for a while :-) Brooks 1986/2006 R22 "Changes" -- View this message in context: http://rhodes-22.1065344.n5.nabble.com/Wanna-be-questions-tp49605p49620.html Sent from the Rhodes 22 mailing list archive at Nabble.com.See the original archive post