The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

The Rhodes 22 Email List



Permission to come aboard?

2015-04-01; 13:12:43 EDT

Member Since

2014-05-06

Posts: 3821

Bob:

When you say that you installed "extra" ballast I am wondering what was
there already and how much you added. I would like to add some myself but
don't know how much or where exactly to put it.

The stringers under the settee and galley rotted out for me as well. Water
gets trapped there - especially under the galley where it is not visible and
rots out the wood. The source of water for me primarily was a leaking hull
deck join. I have glassed the joint so that should finally end the leaks but
I also put drain holes in the bottom of the stringers to ensure that any
water that makes its way in, and it will, can drain out on its own. Further,
I put an inspection hole in the bottom self of the galley so I can reach in
to the space should I want to check for water or retrieve anything the might
fall in behind the shelf. I am also encapsulating the settee and galley
stringers in multiple coats of epoxy. I am putting white Formica laminate on
the face of these pieces and all other wood surfaces to give a maintenance
free and easy to clean interior. 

With the floor stringers I am intending to use pressure treated deck boards.
A previous owner used pressure treated fence boards and while they stood up
very well to rot and held to epoxy very well, being only 1/2" thick did not
give a sufficient area to screw the deck boards to. Of course I will be
putting drain holes in them as well.

Graham 



See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting