The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

The Rhodes 22 Email List



Galley base stringer

2015-04-01; 15:31:29 EDT

Member Since

2014-05-06

Posts: 3821

   Gents,

   IIRC those drawings were from a 1974 (or possibly a 1976). I still
   have ther 76 hull and can double check.  If you sketch up the
   dimensions and layout of you boat, I'll make an updated sketch.

   Todd T.

   Sent: Tuesday, March 31, 2015 at 8:36 PM
   From: "The Rhodes 22 Email List" <rhodes22-list at rhodes22.org>
   To: "The Rhodes 22 Email List" <rhodes22-list at rhodes22.org>
   Subject: Re: [Rhodes22-list] Galley base stringer
   Graham:
   You are a scholar and a gentleman!
   Thank you!
   Bob(palatka)
   > On Mar 31, 2015, at 8:17 PM, The Rhodes 22 Email List
   <rhodes22-list at rhodes22.org> wrote:
   >
   > Bob:
   >
   > Funny that you should ask. I just cut out a new galley stringer
   yesterday. I
   > have attached a photo of the old one with dimensions marked on it.
   In case
   > you can't read them, the total length is 69 3/4" and the height of
   the
   > stringer starting at the left (towards the bow)is 4 1/2" and then
   the height
   > at each 1' mark going to the right (aft)is as follows:
   > 5 1/2, 5 3/4,5 3/4, 5 5/8, 5 3/4 and the height at the end is 4 3/4.
   > In the photo you can see the black line where the floorboards rested
   on a
   > support ledge.
   >
   > If you want more detailed measurements, just ask.
   >
   > My boat is a 1976. I don't know if or when those dimensions changed
   over the
   > years.
   >
   > Hope this helps,
   >
   > Graham
   >
   >
See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting