2015-04-21; 17:56:59 EDT
Member Since
2014-05-06
Posts: 3821
Of course an anchor is part of a boat's safety equipment. As I said, I have never seen anchor stowage appear on any Coast Guard safety checklist. Not denying that you almost got nailed for it, just saying that I've never seen it on any list and until now never heard of anyone having a problem with the CG over it. I do believe thirty feet of chain is overkill for most anchors on a 3000 lb 22 foot boat and indeed could become a safety hazard in and of itself without proper stowage. Glad you've figured out a way to handle it. No way I would want to try. I will readily admit that our anchoring conditions on the Chesapeake are very different than yours on Lake Erie. We have mostly good mud bottoms and lots of harbors of refuge, most of which are quite close together. We rarely anchor in open water and then only under the most benign conditions. Five foot waves would have us scurrying for cover before or as they developed. We get a lot of 20 knot winds but it takes hours for them to build waves that big. Most of our stressful anchoring comes with wind shifts where a protected anchorage suddenly becomes exposed or when we get 60 knot winds through an anchorage with a thunderstorm. Our anchoring set-up has worked for those situations, for the emergency we had in the Narrows and I believe it will work for any emergency we are likely to face. We do watch weather carefully. Your narrative does remind that I had difficulty with the deck plate over the anchor rode bin. There were times that my small hands couldn't budge it. We tried just threading it down the cowl vent but that wasn't a good solution as wind driven rain could find it's way below - not to mention the mosquitos in the anchorage. That along with the wet muddy rode in the v-berth issue contributed to our decision to find another solution. Best, Mary Lou 1991 R22 Fretless Rock Hall, MD At 04:49 PM 4/21/2015, you wrote:See the original archive post