The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

The Rhodes 22 Email List



Cabin Roof Plate

2015-05-04; 16:25:54 EDT

Member Since

2014-05-06

Posts: 3821

Thanks everyone for all the input.  I pretty much did what Richard suggested and put a soupy two part epoxy into the cleaned out screw holes, screwed the block back in place while the epoxy was moist and coated the screws and bottom of block with 5200 for a secure bond.  The other option if this fails is to thru bolt the block which is a GB alternate but this puts another nut in cabin interior.  I will let all this set up for a couple of days and then try to raise the mast again.

Christopher P. Cowie    

4400 MacArthur Blvd, NW
Suite 300
Washington, DC 20007
202.342.2711 ex.204 ? 202.342.2691 fax ? 202.270.1470 mobile
[ccowie at cowieassociates.com]


Please consider the environment before printing this email.

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting