The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

The Rhodes 22 Email List



Cabin Roof Plate

2015-05-07; 15:29:27 EDT

Member Since

2014-05-06

Posts: 3821

Chrispother,
NEVER, EVER THRU BOLT.
Rummy
 
 
In a message dated 5/4/2015 4:26:08 P.M. Eastern Daylight Time,  
rhodes22-list at rhodes22.org writes:

Thanks  everyone for all the input.  I pretty much did what Richard 
suggested and  put a soupy two part epoxy into the cleaned out screw holes, screwed 
the block  back in place while the epoxy was moist and coated the screws 
and bottom of  block with 5200 for a secure bond.  The other option if this 
fails is to  thru bolt the block which is a GB alternate but this puts another 
nut in cabin  interior.  I will let all this set up for a couple of days 
and then try  to raise the mast again.

Christopher P. Cowie   

4400 MacArthur Blvd, NW
Suite 300
Washington, DC  20007
202.342.2711 ex.204 ? 202.342.2691 fax ? 202.270.1470  mobile
[ccowie at cowieassociates.com]


Please consider the  environment before printing this email.

-----Original  Message-----
From: rhodes22-list-bounces at rhodes22.org  
[mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 Email  List
Sent: Monday, May 04, 2015 3:56 PM
To: The Rhodes 22 Email  List
Subject: Re: [Rhodes22-list] Cabin Roof Plate

Hi Chris...sorry  to hear about your little "mishap". There seems to be as 
many opinions about  how to fix it as there R22 owners. My two cents is to 
clean the holes out so  there are no loose flakes and fill the holes with 
runny epoxy, Most important  is when to you screw down the plate make sure you 
really seal it well - in the  holes and around, I would use 5200 as I would 
hope you wouldn't have to do  this again but 4200 is fine as well.

FYI i am using a hanked on Genoa  and no IMF so with no canvas on the mast 
I can raise the mast with great ease  using a simple bock and tackle.

Cheers
Richard

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting