The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

The Rhodes 22 Email List



Thermoelectric cooler - shroud length

2015-05-19; 17:44:13 EDT

Member Since

2014-05-06

Posts: 3821

You need to sign your messages for others to know who they are responding
to, so I can't address you by name.
I measured the upper shroud as  being 25'6". That was measured from the
clevis pin at the tang to the point where the shroud is attached to the
turnbuckle. At about midpoint my turnbuckle is 9" long from where it
attached to the shroud to its chainplate pin. So the distance from the tang
to the chainplate would be 27'3" approximately depending on the adjustment
of the turnbuckle. The shroud is attached to the spreader so I was unable to
straighten it out for a more accurate measure.
Hope this helps.


Graham 

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting