2015-05-22; 08:10:12 EDT
Member Since
2014-05-06
Posts: 3821
Hello all finally getting ready to launch "Patience" here in the far north (compared to everyone but Graham!) after a long winter and some elbow grease. She spent 22 years on the trailer under cover, but seems in remarkably good shape, which is a tribute to the quality of the boat and its parts. It has turned into a love affair, but my wife has accepted my new mistress with equanimity, which is a first. Now the question: My mast step is held in place with three screws set into threaded receivers bedded in the fiberglass, but the base has two additional screw holes centred under the mast, and no sign they were ever used. The boat is a '76 does anyone else have a similar mast step, and if so are there screws in those central holes for added strength? Being a Rhodes it must mean something. I'm going to launch her for the season on Lake Memphremagog, which is a 25 mile long (and only 1 to 2 miles wide) glacier lake that runs from Magog, Quebec to Newport, Vt. Winds are variable because of the surrounding mountains and often die at the end of the afternoon. I am trying out a 2.5hp 4 stroke that was hanging unused in the boathouse, but expect that next summer on Lake Champlain and perhaps up St. Lawrence River I'll need something more like a 6 hp. The only question mark left for the launch is will the centreboard go down???? I will keep you posted. Jefferson Patience (1976)See the original archive post