< prior
Back to Month
Go to Thread
2015-06-07; 20:24:37 EDT
Member Since
2014-05-06
Posts: 3821
Where do most boats have the bilge pump discharge? Bob(palatka)See the original archive post
> On Jun 7, 2015, at 4:16 PM, The Rhodes 22 Email List <rhodes22-list at rhodes22.org> wrote: > > Not sure about Graham's boat but Fretless has two thru-hulls. One is > the sink. The other is because she was originally had a porta-potty > that could be emptied via the deck pump-out or pumped overboard. Not > legal anywhere we sail, so we just capped it. > > Mary Lou > 1991 R22 Fretless > Recycled 1998 > now in the water > Rock Hall, MD > > At 11:20 PM 6/6/2015, you wrote: >> Nice job Graham. One question. Why two thru hulls at the waterline? >> >> Jerry Lowe >> >> >> >> >> >>> Graham, >>> >>> Wow! It looks great! I love the shape of the window, especially the >>> sloped >>> leading edge. Very attractive design. I am so glad that all went well. >>> >>> We need a via from the inside. >>> >>> Mike >>> s/v Windlass ('91) >>> Nissequogue River, NY >>> >>> >>> -----Original Message----- >>> From: rhodes22-list-bounces at rhodes22.org >>> [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 >>> Email >>> List >>> Sent: Saturday, June 6, 2015 9:30 PM >>> To: 'The Rhodes 22 Email List' >>> Subject: [Rhodes22-list] Window replacement update - done >>> >>> So I screwed up my courage and installed the starboard window today. In >>> the >>> end I was satisfied with the outcome but along the way I thought at one >>> point that I had an unmitigated disaster on my hands. >>> >>> I applied the double-sided tape to the cabin leaving 1/2 inch between the >>> tale and where the edge of the acrylic panel for the sealant, applied the >>> sealant (see picture attached) and pressed on the glass. I had my wife >>> help >>> by anchoring the bottom aft corner in alignment with the moulded in ledge >>> and then I wrapped the glass into place going forward. When I got to the >>> front I checked back and discovered that my wife thought she was supposed >>> to >>> place the glass on the top of the ledge instead of on the face of the >>> cabin >>> side so the whole thing was badly misaligned and the aft part of the >>> window >>> was not even touching the cabin side - my nightmare scenario. >>> >>> Lesson one, don't assume that your helper understands what you intend. >>> >>> Contrary to what I expected, I was able to pull the glass off and >>> reposition >>> it properly. It took a lot of force but it did separate cleanly. >>> Fortunately >>> I had pressed the tape firmly onto the cabin using a roller before I >>> applied >>> the sealant but I had not yet pressed the glass into the tape firmly. The >>> second attempt, aided by some colourful language did the trick. >>> >>> Lesson two: The tape is not entirely unforgiving when pressure has not >>> been >>> applied. I was very very lucky this time. >>> >>> Lesson three: The tape is amazingly tenacious. Once pressed into place I >>> did >>> not need to use the clamps that I had devised to hold the glass in place >>> while the sealant cured. >>> >>> Lesson four: A white boat with black sealant is a potential disaster. I >>> masked back 2 feet from the edge of the glass and changed my plastic >>> gloves >>> repeatedly but I still had black goo everywhere - including my face. >>> Fortunately, as long as you get to it before it cures it can be removed. >>> For >>> the port side I will increase the area that I mask off and have a place >>> away >>> from the boat where I can put tools down. >>> >>> Lesson five: Removing the protective covering from the inside after the >>> glass was installed was easy. I could pull up the edge with my fingernail >>> and then pull the paper off in one piece. Having painted over the paper I >>> had worried that it might be difficult to peel the paper off but the paint >>> turned out to have no effect. >>> >>> It feels like a solid installation but only time will tell. Hopefully it >>> won't spring off overnight. >>> >>> Now that I have gone through this once, hopefully the port side will go >>> smoother and with lest anxious anticipation. >>> >>> Given the cost of ports and the problem of installing them so they don't >>> leak, I am satisfied with this fix - about $300 total for both sides. The >>> bonus is that the window openings are considerably larger than the >>> original >>> ports. >>> >>> I have attached a picture of the finished product. >>> >>> >>> Graham >>> -------------- next part -------------- >>> A non-text attachment was scrubbed... >>> Name: Starboard window installed June 6. 2015.jpg >>> Type: image/jpeg >>> Size: 96409 bytes >>> Desc: not available >>> Url : >> http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150606/5fbe2fc >>> a/attachment.jpg >>> -------------- next part -------------- >>> A non-text attachment was scrubbed... >>> Name: Applying sealant and tape b.jpg >>> Type: image/jpeg >>> Size: 136459 bytes >>> Desc: not available >>> Url : >> http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150606/5fbe2fc >>> a/attachment-0001.jpg >>> __________________________________________________ >>> To subscribe/unsubscribe go to >>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list >>> >>> For the list Charter and help with using the mailing list and archives go >>> to >>> http://www.rhodes22.org/list >>> __________________________________________________ >>> >>> __________________________________________________ >>> To subscribe/unsubscribe go to >>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list >>> >>> For the list Charter and help with using the mailing list and archives go >>> to http://www.rhodes22.org/list >>> __________________________________________________ >> >> >> __________________________________________________ >> To subscribe/unsubscribe go to >> http://www.rhodes22.org/mailman/listinfo/rhodes22-list >> >> For the list Charter and help with using the mailing list and >> archives go to http://www.rhodes22.org/list >> __________________________________________________ >> >> >> ----- >> No virus found in this message. >> Checked by AVG - www.avg.com >> Version: 2015.0.5961 / Virus Database: 4355/9963 - Release Date: 06/07/15 > > __________________________________________________ > To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list > > For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list > __________________________________________________
To use your email application to send a messsage to the webmaster rather than this form, .
Your post is being sent... 