< prior
Back to Month
Go to Thread
2015-06-07; 20:59:28 EDT
Member Since
2014-05-06
Posts: 3821
Ah Ha! That is it! I knew that hole in my boat had a purpose. Thanks Bob. GrahamSee the original archive post
-----Original Message----- From: rhodes22-list-bounces at rhodes22.org [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 Email List Sent: June-07-15 8:25 PM To: The Rhodes 22 Email List Subject: Re: [Rhodes22-list] Window replacement update - done Where do most boats have the bilge pump discharge? Bob(palatka) > On Jun 7, 2015, at 4:16 PM, The Rhodes 22 Email List <rhodes22-list at rhodes22.org> wrote: > > Not sure about Graham's boat but Fretless has two thru-hulls. One is > the sink. The other is because she was originally had a porta-potty > that could be emptied via the deck pump-out or pumped overboard. Not > legal anywhere we sail, so we just capped it. > > Mary Lou > 1991 R22 Fretless > Recycled 1998 > now in the water > Rock Hall, MD > > At 11:20 PM 6/6/2015, you wrote: >> Nice job Graham. One question. Why two thru hulls at the waterline? >> >> Jerry Lowe >> >> >> >> >> >>> Graham, >>> >>> Wow! It looks great! I love the shape of the window, especially the >>> sloped leading edge. Very attractive design. I am so glad that all >>> went well. >>> >>> We need a via from the inside. >>> >>> Mike >>> s/v Windlass ('91) >>> Nissequogue River, NY >>> >>> >>> -----Original Message----- >>> From: rhodes22-list-bounces at rhodes22.org >>> [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes >>> 22 Email List >>> Sent: Saturday, June 6, 2015 9:30 PM >>> To: 'The Rhodes 22 Email List' >>> Subject: [Rhodes22-list] Window replacement update - done >>> >>> So I screwed up my courage and installed the starboard window today. >>> In the end I was satisfied with the outcome but along the way I >>> thought at one point that I had an unmitigated disaster on my hands. >>> >>> I applied the double-sided tape to the cabin leaving 1/2 inch >>> between the tale and where the edge of the acrylic panel for the >>> sealant, applied the sealant (see picture attached) and pressed on >>> the glass. I had my wife help by anchoring the bottom aft corner in >>> alignment with the moulded in ledge and then I wrapped the glass >>> into place going forward. When I got to the front I checked back and >>> discovered that my wife thought she was supposed to place the glass >>> on the top of the ledge instead of on the face of the cabin side so >>> the whole thing was badly misaligned and the aft part of the window >>> was not even touching the cabin side - my nightmare scenario. >>> >>> Lesson one, don't assume that your helper understands what you intend. >>> >>> Contrary to what I expected, I was able to pull the glass off and >>> reposition it properly. It took a lot of force but it did separate >>> cleanly. >>> Fortunately >>> I had pressed the tape firmly onto the cabin using a roller before I >>> applied the sealant but I had not yet pressed the glass into the >>> tape firmly. The second attempt, aided by some colourful language >>> did the trick. >>> >>> Lesson two: The tape is not entirely unforgiving when pressure has >>> not been applied. I was very very lucky this time. >>> >>> Lesson three: The tape is amazingly tenacious. Once pressed into >>> place I did not need to use the clamps that I had devised to hold >>> the glass in place while the sealant cured. >>> >>> Lesson four: A white boat with black sealant is a potential >>> disaster. I masked back 2 feet from the edge of the glass and >>> changed my plastic gloves repeatedly but I still had black goo >>> everywhere - including my face. >>> Fortunately, as long as you get to it before it cures it can be removed. >>> For >>> the port side I will increase the area that I mask off and have a >>> place away from the boat where I can put tools down. >>> >>> Lesson five: Removing the protective covering from the inside after >>> the glass was installed was easy. I could pull up the edge with my >>> fingernail and then pull the paper off in one piece. Having painted >>> over the paper I had worried that it might be difficult to peel the >>> paper off but the paint turned out to have no effect. >>> >>> It feels like a solid installation but only time will tell. >>> Hopefully it won't spring off overnight. >>> >>> Now that I have gone through this once, hopefully the port side will >>> go smoother and with lest anxious anticipation. >>> >>> Given the cost of ports and the problem of installing them so they >>> don't leak, I am satisfied with this fix - about $300 total for both >>> sides. The bonus is that the window openings are considerably larger >>> than the original ports. >>> >>> I have attached a picture of the finished product. >>> >>> >>> Graham >>> -------------- next part -------------- A non-text attachment was >>> scrubbed... >>> Name: Starboard window installed June 6. 2015.jpg >>> Type: image/jpeg >>> Size: 96409 bytes >>> Desc: not available >>> Url : >> http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150606/ >> 5fbe2fc >>> a/attachment.jpg >>> -------------- next part -------------- A non-text attachment was >>> scrubbed... >>> Name: Applying sealant and tape b.jpg >>> Type: image/jpeg >>> Size: 136459 bytes >>> Desc: not available >>> Url : >> http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150606/ >> 5fbe2fc >>> a/attachment-0001.jpg >>> __________________________________________________ >>> To subscribe/unsubscribe go to >>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list >>> >>> For the list Charter and help with using the mailing list and >>> archives go to http://www.rhodes22.org/list >>> __________________________________________________ >>> >>> __________________________________________________ >>> To subscribe/unsubscribe go to >>> http://www.rhodes22.org/mailman/listinfo/rhodes22-list >>> >>> For the list Charter and help with using the mailing list and >>> archives go to http://www.rhodes22.org/list >>> __________________________________________________ >> >> >> __________________________________________________ >> To subscribe/unsubscribe go to >> http://www.rhodes22.org/mailman/listinfo/rhodes22-list >> >> For the list Charter and help with using the mailing list and >> archives go to http://www.rhodes22.org/list >> __________________________________________________ >> >> >> ----- >> No virus found in this message. >> Checked by AVG - www.avg.com >> Version: 2015.0.5961 / Virus Database: 4355/9963 - Release Date: >> 06/07/15 > > __________________________________________________ > To subscribe/unsubscribe go to > http://www.rhodes22.org/mailman/listinfo/rhodes22-list > > For the list Charter and help with using the mailing list and archives > go to http://www.rhodes22.org/list > __________________________________________________ __________________________________________________ To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list __________________________________________________
To use your email application to send a messsage to the webmaster rather than this form, .
Your post is being sent... 