< prior
Back to Month
Go to Thread
2015-06-08; 09:32:58 EDT
Member Since
2014-05-06
Posts: 3821
My guess is that its for the bilge pump discharge. Bob (palatka)See the original archive post
> On Jun 7, 2015, at 8:49 PM, The Rhodes 22 Email List <rhodes22-list at rhodes22.org> wrote: > > Jerry: > For the life of me I can't remember what the second thru hull is for. It has > been so long since I took the galley apart. One is a grey water discharge > but the other...? Hopefully it will all come back when I rebuild the > interior. > > Graham > > > -----Original Message----- > From: rhodes22-list-bounces at rhodes22.org > [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 Email > List > Sent: June-06-15 11:21 PM > To: The Rhodes 22 Email List > Subject: Re: [Rhodes22-list] Window replacement update - done > > Nice job Graham. One question. Why two thru hulls at the waterline? > > Jerry Lowe > > > > > >> Graham, >> >> Wow! It looks great! I love the shape of the window, especially the >> sloped leading edge. Very attractive design. I am so glad that all >> went well. >> >> We need a via from the inside. >> >> Mike >> s/v Windlass ('91) >> Nissequogue River, NY >> >> >> -----Original Message----- >> From: rhodes22-list-bounces at rhodes22.org >> [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 >> Email List >> Sent: Saturday, June 6, 2015 9:30 PM >> To: 'The Rhodes 22 Email List' >> Subject: [Rhodes22-list] Window replacement update - done >> >> So I screwed up my courage and installed the starboard window today. >> In the end I was satisfied with the outcome but along the way I >> thought at one point that I had an unmitigated disaster on my hands. >> >> I applied the double-sided tape to the cabin leaving 1/2 inch between >> the tale and where the edge of the acrylic panel for the sealant, >> applied the sealant (see picture attached) and pressed on the glass. I >> had my wife help by anchoring the bottom aft corner in alignment with >> the moulded in ledge and then I wrapped the glass into place going >> forward. When I got to the front I checked back and discovered that my >> wife thought she was supposed to place the glass on the top of the >> ledge instead of on the face of the cabin side so the whole thing was >> badly misaligned and the aft part of the window was not even touching >> the cabin side - my nightmare scenario. >> >> Lesson one, don't assume that your helper understands what you intend. >> >> Contrary to what I expected, I was able to pull the glass off and >> reposition it properly. It took a lot of force but it did separate >> cleanly. >> Fortunately >> I had pressed the tape firmly onto the cabin using a roller before I >> applied the sealant but I had not yet pressed the glass into the tape >> firmly. The second attempt, aided by some colourful language did the >> trick. >> >> Lesson two: The tape is not entirely unforgiving when pressure has not >> been applied. I was very very lucky this time. >> >> Lesson three: The tape is amazingly tenacious. Once pressed into place >> I did not need to use the clamps that I had devised to hold the glass >> in place while the sealant cured. >> >> Lesson four: A white boat with black sealant is a potential disaster. >> I masked back 2 feet from the edge of the glass and changed my plastic >> gloves repeatedly but I still had black goo everywhere - including my >> face. >> Fortunately, as long as you get to it before it cures it can be removed. >> For >> the port side I will increase the area that I mask off and have a >> place away from the boat where I can put tools down. >> >> Lesson five: Removing the protective covering from the inside after >> the glass was installed was easy. I could pull up the edge with my >> fingernail and then pull the paper off in one piece. Having painted >> over the paper I had worried that it might be difficult to peel the >> paper off but the paint turned out to have no effect. >> >> It feels like a solid installation but only time will tell. Hopefully >> it won't spring off overnight. >> >> Now that I have gone through this once, hopefully the port side will >> go smoother and with lest anxious anticipation. >> >> Given the cost of ports and the problem of installing them so they >> don't leak, I am satisfied with this fix - about $300 total for both >> sides. The bonus is that the window openings are considerably larger >> than the original ports. >> >> I have attached a picture of the finished product. >> >> >> Graham >> -------------- next part -------------- A non-text attachment was >> scrubbed... >> Name: Starboard window installed June 6. 2015.jpg >> Type: image/jpeg >> Size: 96409 bytes >> Desc: not available >> Url : >> http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150606/5 >> fbe2fc >> a/attachment.jpg >> -------------- next part -------------- A non-text attachment was >> scrubbed... >> Name: Applying sealant and tape b.jpg >> Type: image/jpeg >> Size: 136459 bytes >> Desc: not available >> Url : >> http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150606/5 >> fbe2fc >> a/attachment-0001.jpg >> __________________________________________________ >> To subscribe/unsubscribe go to >> http://www.rhodes22.org/mailman/listinfo/rhodes22-list >> >> For the list Charter and help with using the mailing list and archives >> go to http://www.rhodes22.org/list >> __________________________________________________ >> >> __________________________________________________ >> To subscribe/unsubscribe go to >> http://www.rhodes22.org/mailman/listinfo/rhodes22-list >> >> For the list Charter and help with using the mailing list and archives >> go to http://www.rhodes22.org/list >> __________________________________________________ > > > __________________________________________________ > To subscribe/unsubscribe go to > http://www.rhodes22.org/mailman/listinfo/rhodes22-list > > For the list Charter and help with using the mailing list and archives go to > http://www.rhodes22.org/list > __________________________________________________ > > __________________________________________________ > To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list > > For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list > __________________________________________________
To use your email application to send a messsage to the webmaster rather than this form, .
Your post is being sent... 