The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

The Rhodes 22 Email List



Water in the cockpit when motoring

2015-06-08; 13:10:59 EDT

Member Since

2014-05-06

Posts: 3821

I have taken a different approach.  I cemented approximately 3"- 4" of 3/4" (I think) CPVC pipe to a nipple.  The outside diameter of the nipple fits inside the cockpit drain fitting.  This setup raises the level the water needs to reach before it will go over the top of the pipe and enter the cockpit.  One feature of this setup is that if you forget to remove it after sailing, the rain water will only flood the cockpit until it reaches the top of the pipe.  You will need to be careful not to step on it, since that makes it difficult to remove.  Depending on the height that the cockpit floor was bonded to the hull, you can determine how high pipe needs to be to prevent seawater from entering. Don SimonsIthaca, NY
      From: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
 To: The Rhodes 22 Email List <rhodes22-list at rhodes22.org> 
 Sent: Monday, June 8, 2015 12:40 PM
 Subject: Re: [Rhodes22-list] Water in the cockpit when motoring
   
A standard marine drain plug can be inserted when you have extra crew in the cockpit.

http://www.westmarine.com/buy/west-marine--flip-lock-drain-plugs--P001919323

Christopher P. Cowie    

4400 MacArthur Blvd, NW
Suite 300
Washington, DC 20007
202.342.2711 ex.204 ? 202.342.2691 fax ? 202.270.1470 mobile
[ccowie at cowieassociates.com]


Please consider the environment before printing this email.

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting