2015-06-09; 21:05:14 EDT
Member Since
2014-05-06
Posts: 3821
Graham, nicely done. Wish mine came out as nice as yours. Everyone else, this past weekend I replaced my windows and my companionway door. I used the 3M VHB 4991 double sided tape and Dow Corning 791 silicon as Graham suggested for the windows, and I can attest their wonderfulness. I identified a nice way of generating pressure on the windows for the gasket to seal. I used two dent puller suction cups from inside, and wooden wedges through the handle to maintain pressure. Not sure if this would help with larger windows like Graham's. I ended up using 3/16" bronze plexiglass for the windows and 3/8" plexiglass for the companionway. 1/8" seemed too flexible for the size, though in retrospect I think it would have been fine since the windows are smaller, and the tape adhesion would have been simpler with a more flexible pane. http://www.eplastics.com/Plastic?search=Bronze2370 The 3M VHB 4991 tape, I got in 1" width, boxed out the frame, and used a razor blade to cut off excess after window installation. Having the 1" tape gave me a solid taper, and the silicon will provide a good waterseal on the tape (hopefully). I toyed with the idea of oven heating the plexiglass to increase flexibility, but decided against it due to the size difference, and fear it would break the plexiglass (since the sheer strength of the 3M VHB tape is insane). Sadly, my windows & door looks nicer than the boat, and its unbalanced now. Photos: 1) Previous Owner's pine/polyurethane companionway door panels. 2) New window close up 3) New window & old window side by side. 4) My replaced companionway door panels. IMG_20150606_192256.jpg IMG_20150606_174930.jpg IMG_20150606_180005.jpg IMG_20150607_152710.jpgSee the original archive post