< prior
Back to Month
Go to Thread
2015-06-10; 07:21:01 EDT
Member Since
2014-05-06
Posts: 3821
Argh... Signature below. -- Curtis Havre de Grace, MD s/v Ruck ItSee the original archive post
On Tue, Jun 9, 2015 at 10:31 PM The Rhodes 22 Email List < rhodes22-list at rhodes22.org> wrote: > You didn't sign your message so I am not sure who I am responding to. > > Your ports look like a great improvement to me and should give you ports > that should never leak and at the fraction of the cost of new ports. I am > planning to do as you did with the companionway door except that I will not > be using wood trim. Yours looks terrific and I am now keen to do it. The > only bright work on my boat will be the tiller. I will either use aluminium > or composite lumber for the trim - probably the latter. > > I also toyed with the idea of shaping the acrylic using heat but I would > need to build an oven that would hold pieces over 5'long and I was worried > that I would just ruin the piece. In theory you can shape the acrylic with > a > heat gun but from what I read it is very difficult to get an even bend on a > large piece. As it turned out the acrylic took the shape very well and the > tape held it firmly in place. > > Graham > > -----Original Message----- > From: rhodes22-list-bounces at rhodes22.org > [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 > Email > List > Sent: June-09-15 9:05 PM > To: The Rhodes 22 Email List > Subject: [Rhodes22-list] Replaced Windows/Companionway Door Panels > > Graham, nicely done. Wish mine came out as nice as yours. > > Everyone else, this past weekend I replaced my windows and my companionway > door. I used the 3M VHB 4991 double sided tape and Dow Corning 791 silicon > as Graham suggested for the windows, and I can attest their wonderfulness. > > I identified a nice way of generating pressure on the windows for the > gasket > to seal. I used two dent puller suction cups from inside, and wooden > wedges > through the handle to maintain pressure. Not sure if this would help with > larger windows like Graham's. > > I ended up using 3/16" bronze plexiglass for the windows and 3/8" > plexiglass for the companionway. 1/8" seemed too flexible for the size, > though in retrospect I think it would have been fine since the windows are > smaller, and the tape adhesion would have been simpler with a more flexible > pane. http://www.eplastics.com/Plastic?search=Bronze2370 > > The 3M VHB 4991 tape, I got in 1" width, boxed out the frame, and used a > razor blade to cut off excess after window installation. Having the 1" > tape gave me a solid taper, and the silicon will provide a good waterseal > on > the tape (hopefully). > > I toyed with the idea of oven heating the plexiglass to increase > flexibility, but decided against it due to the size difference, and fear it > would break the plexiglass (since the sheer strength of the 3M VHB tape is > insane). > > Sadly, my windows & door looks nicer than the boat, and its unbalanced now. > > Photos: > 1) Previous Owner's pine/polyurethane companionway door panels. > 2) New window close up > 3) New window & old window side by side. > 4) My replaced companionway door panels. > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: IMG_20150606_192256.jpg > Type: image/jpeg > Size: 487973 bytes > Desc: not available > Url : > > http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150610/b29ba87 > 2/attachment.jpg > <http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150610/b29ba872/attachment.jpg> > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: IMG_20150606_174930.jpg > Type: image/jpeg > Size: 338189 bytes > Desc: not available > Url : > > http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150610/b29ba87 > 2/attachment-0001.jpg > <http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150610/b29ba872/attachment-0001.jpg> > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: IMG_20150606_180005.jpg > Type: image/jpeg > Size: 509142 bytes > Desc: not available > Url : > > http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150610/b29ba87 > 2/attachment-0002.jpg > <http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150610/b29ba872/attachment-0002.jpg> > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: IMG_20150607_152710.jpg > Type: image/jpeg > Size: 547912 bytes > Desc: not available > Url : > > http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150610/b29ba87 > 2/attachment-0003.jpg > <http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150610/b29ba872/attachment-0003.jpg> > __________________________________________________ > To subscribe/unsubscribe go to > http://www.rhodes22.org/mailman/listinfo/rhodes22-list > > For the list Charter and help with using the mailing list and archives go > to > http://www.rhodes22.org/list > __________________________________________________ > > __________________________________________________ > To subscribe/unsubscribe go to > http://www.rhodes22.org/mailman/listinfo/rhodes22-list > > For the list Charter and help with using the mailing list and archives go > to http://www.rhodes22.org/list > __________________________________________________ >
To use your email application to send a messsage to the webmaster rather than this form, .
Your post is being sent... 