The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

The Rhodes 22 Email List



shroud covers

2015-07-23; 16:48:21 EDT

Member Since

2014-05-06

Posts: 3821

Jose
     Yeah, going about in light winds is a bummer with that large genny.  The PVC guards do help, but the jib sheet still gets caught up down at the chain plate, because they push up the PVC.  The PVC is still good for helping with sail wear, and I have them on my boat.  However, I have taken (in light winds) to hauling in the genny so it clears the stays then redeploying it on the other side. The light winds will move the shortened sail right across.  It saves a lot of bull and make you look like a wise and practiced skipper.  Besides, in light winds, you are not really doing anything anyway.  This, at least, gives you a task.  

Joe Camp
s/v John Dawson
Bohemia River, MD  

 
      From: The Rhodes 22 Email List <rhodes22-list at rhodes22.org>
 To: rhodes22-list at rhodes22.org 
 Sent: Thursday, July 23, 2015 2:26 PM
 Subject: [Rhodes22-list] shroud covers
   
Hello everyone

I have a 175 genoa and I'm having difficulties tacking; particularly when
there's little wind, the sails gets caught every time. From old posts I
gather that many in this list have shroud covers (e.g. PVC pipes), and that
this helps with the tacking. 

My question is, can I install these covers without taking down the mast,
i.e. if I release the turnbuckles while the mast is up, will i be able to
tighten them again? Is this true for all the shrouds?

Many thanks

José

S/V STEADY STATE 
1999/2015 R22 
Herrington Harbour South, MD



--
View this message in context: http://rhodes-22.1065344.n5.nabble.com/shroud-covers-tp50458.html
Sent from the Rhodes 22 mailing list archive at Nabble.com.

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting