The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

The Rhodes 22 Email List



Green goop with leaks

2015-08-31; 11:14:54 EDT

Member Since

2014-05-06

Posts: 3821

I forgot to mention that removing the rub rail will not give you a better
view of the hull deck join as the seal is below the rail rather than behind
it. You might try to use a tool with a hook to scrape out as much sealant as
you can and then patch it from below. 

If you intend to do a complete rebuild of the join the you would need to
remove the rub rail and any screws or rivets at the join so that you can use
wedges to separate the join enough to remove the old sealant and give some
space to squeeze in new stuff. Then refasten the hull and deck mechanically.


For that you would use 3M 5200 or equivalent. Rummy swore by a sealant
available at Home Depot called N1 I believe. There is quite a bit in the
archives on resealing the joint properly but if the leak is only in one
place I would try the patch approach first as a complete reseal is a pretty
big job and replacing the rub rail can be expensive.

Graham Stewart
Agile. R22, 1976
Kingston Ontario Canada




See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting