The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

The Rhodes 22 Email List



Bilge ventilation

2015-09-12; 18:32:18 EDT

Member Since

2014-05-06

Posts: 3821

Larry:
I used white oak and epoxy when I rebuilt my 20' mahogany runabout to
replace rotted ribs and bottom. White oak is resistant to rot but not
impervious as the original wood ribs were white oak as well and eventually
rotted albeit over a 40 year period. The big advantage using white oak is
that it is amazing wood to steam bend. It is hard as rock when dry but after
steaming for a while thin strips can be bent by hand easily. That makes it
perfect for steam-bent ribs. 

Hopefully the epoxy will prohibit rot that only works if the epoxy totally
encapsulates the wood with no cuts gouges or holes in the wood. In my case
the epoxy also bonded the ribs to mahogany ply that was used to cold mold
the new bottom. That combination made for an incredibly strong, solid, dry
and relatively light boat.

For the Rhodes floor, however, white oak is expensive and I would be
inclined to use something that did not depend on the epoxy to be perfectly
sealed. Pressure treated seems like the easiest, cheapest and most certain
material to use. I will still use epoxy to bond it in place. Before I bought
my Rhodes the previous owner rebuilt the floor structure using pressure
treated fence boards. They lasted for more than 20 years with no sign of
rot. The problem with using fence boats is that they are only .5 inch thick
and that did not give a sufficiently wide edge for the floor boards to be
screwed down. I was also unhappy with where they were located so I tore it
all out to be replaced with thicker stock. I will no doubt be kicking myself
for that as tearing things out is so much easier than putting it all back in
- a realization that weighs more heavily as I consider that it was not
really necessary except to feed my obsessive nature.


Graham Stewart
Agile. R22, 1976
Kingston Ontario Canada




See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting