The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

The Rhodes 22 Email List



Bilge ventilation

2015-09-13; 06:17:11 EDT

Member Since

2014-05-06

Posts: 3821

We used marine ply too and the lowes carpet........we are also using  
starboard for the trim...such a fun project working on this boat..something very  
special about the Rhodes22...Cudo's to Stan for producing a sweet little  
boat...
Helen
(no name YET )
Sanford Fl
 
 
In a message dated 9/12/2015 11:27:08 P.M. Eastern Daylight Time,  
rhodes22-list at rhodes22.org writes:

We also  used marine ply for the floor. The carpet sounds exactly like what 
I
found  for our boat at Home Depot. They sell lots of it to boaters and
fishermen  for decks, cockpits and cabins. It looks  great

Larry
Makai
Sarasota
larrywallen at verizon.net


-----Original  Message-----
From:  rhodes22-list-bounces at rhodes22.org
[mailto:rhodes22-list-bounces at rhodes22.org]  On Behalf Of The Rhodes 22 
Email
List
Sent: Saturday, September 12, 2015  10:44 PM
To: The Rhodes 22 Email List
Subject: Re: [Rhodes22-list] Bilge  ventilation

Graham:
I used 2x pressure treated pine lumber for  stringers.  I used polyurethane
construction adhesive to glue them to  the old fiberglass tabs.  It worked
very well.  Then i used  pressure treated 3/4" exterior ply for the floor.
It is very stable and i  hope will last a very long time.  I have also found
a nice  polyethylene  carpet made from recycled water bottles to cover  the
floorboards.  It should be long lasting as well and shouldnt hold  moisture,
dirt or odor.

Bob (palatka)

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting