The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

The Rhodes 22 Email List



engine replacement

2015-09-16; 10:30:44 EDT

Member Since

2014-05-06

Posts: 3821

We have a Yamaha that has performed flawlessly since we started using 
non-ethanol gas. We went with the Yamaha because  of the ease of 
using the flushing port. Because we keep the boat in a slip in salt 
water we like to flush the engine with fresh water after every use. 
This is after a previous Honda died due to salt build up and 
corrosion in the cooling passages. I believe the newer Hondas have a 
flushing port but I think you still have to remove the cowl to get to 
it (at least you did 6 years ago when we were looking for a new 
engine.) The Yamaha's port is accessible and all you do is attach a 
hose to the port near the top of the engine. If you are not in salt 
water (or even if you are and don't keep the boat in a slip) this may 
not matter.

Mary Lou
1991 R22 Fretless
recycled 1998
Rock Hall, MD


At 09:57 AM 9/16/2015, you wrote:
See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting