The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

The Rhodes 22 Email List



engine replacement

2015-09-16; 10:57:14 EDT

Member Since

2014-05-06

Posts: 3821

we ran a Susiki for 15 years while a  liv a aboard cruiser..lived at  
anchor so our dinghy got a lot of use..never a problem purchased it from  
Titusville marina in fl and they took time to check it out each year before we  
sailed NO CHARGE so we were anxious to buy another when we sold our cruising  
boat,dinghy and Susiki which was still running great......My husbands  bad  
health made us think buying a new motor would be good...well, the motor came  
from an online dealer (We would never buy anywhere but LOCAL again)...After 
2  years of trying to get warranty  help..which we got none..paid $150 
three  times and twice they kept our motor over 3 months..after many trys with  
suziki..we did find a dealer in Deland Fl   Deland Family Marina.who  was a 
suziki Rep and a great place to do business I might ad ..who fixed the  
problem...there was a missing part in the carb  this motor NEVER ran  correctly 
and we never touched it..always to their rep...After many contacts  with 
suziki with no help from them what so ever... We would NEVER purchase a  motor 
on line nor a Suziki as the service was just really bad and so  
unfair....The motor itself after nearly 2 years of trying to find a mech to fix  it, now 
runs like a top but we have not and will never recover the three $150  
charges from the marina shops that suziki would not honor..........As I  said 
the motor now runs great and we are just glad to have it RUNNING and use of  
our boat again..  We did buy  another motor so we could continue  sailing 
while trying to deal with Suziki...so happy ending to a very expensive  story 
....P.S our friends all bought Tahatsu engines at the same time and had no  
problems and bought from local dealers.....
 
Helen
Rhodes22
(No name YET) 
Sanford Fl
 
 
In a message dated 9/16/2015 10:32:09 A.M. Eastern Daylight Time,  
rhodes22-list at rhodes22.org writes:

We have  a Yamaha that has performed flawlessly since we started using 
non-ethanol  gas. We went with the Yamaha because  of the ease of 
using the  flushing port. Because we keep the boat in a slip in salt 
water we like to  flush the engine with fresh water after every use. 
This is after a  previous Honda died due to salt build up and 
corrosion in the cooling  passages. I believe the newer Hondas have a 
flushing port but I think you  still have to remove the cowl to get to 
it (at least you did 6 years ago  when we were looking for a new 
engine.) The Yamaha's port is accessible  and all you do is attach a 
hose to the port near the top of the engine. If  you are not in salt 
water (or even if you are and don't keep the boat in a  slip) this may 
not matter.

Mary Lou
1991 R22  Fretless
recycled 1998
Rock Hall, MD


At 09:57 AM 9/16/2015,  you wrote:
See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting