< prior
Back to Month
Go to Thread
2015-09-22; 12:49:02 EDT
Member Since
2014-05-06
Posts: 3821
Graham: Here Here! Well said!! You just captured the essence of the DIY sailor! Bob (palatka) P.s. I am racing you, but yours looks much better!See the original archive post
> On Sep 22, 2015, at 10:29 AM, The Rhodes 22 Email List <rhodes22-list at rhodes22.org> wrote: > > Rob: > Working with epoxy is not difficult but I understand why it might seem > intimidating. I have used epoxy often in reconstructing a for structural > repairs on a wooden boat but this boat is the first time I used it for > surface finishing. So, put this way, it can't possibly be all that > difficult. Using the fairing additive for the final work makes it is easy to > sand the surface very smooth with no visible seam. However, in this case I > did not use gel coat as I completely painted the deck using System Three > waterborne epoxy paint. Gel coat patching is more difficult in terms of > getting the color just right and I have virtually no experience with it. > Other than the color, I don't think gel coat is all that difficult if you > take your time. There are great videos on YouTube that show how it is done. > > My undertaking of big projects is in no way a function of either skill of > experience. I am just foolish. But inevitably I find that it is not as > difficult as it seems and there is virtually nothing that can't be fixed or > redone when, not if, you screw it up. I just take my time and am prepared to > do it repeatedly until I can live with the result. In the end, I do it > because I like doing it and seeing the result. Reconstruction has to be a > satisfying process not just a necessary evil that must be endured to get to > the end product. If I didn't enjoy doing it I would never have gotten this > far and definitely I would not have been able to justify either the time or > expense. I am a social worker by training so that didn't help in any > technical sense. > > So, if you enjoy the process, I don't think there is anything that a person > who can read can't do. The only thing that is impossible, in my books, is to > complete anything according to the time line that I thought was extremely > generous when I started. Everything takes much longer than I expected so I > now refuse to tell anyone - especially my wife - when I think the task will > be completed. The lack of technical skill is not the enemy of such projects, > it is being impatient to finish. > > Graham > > -----Original Message----- > From: rhodes22-list-bounces at rhodes22.org > [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 Email > List > Sent: September 22, 2015 8:42 AM > To: The Rhodes 22 Email List > Subject: Re: [Rhodes22-list] Chainplates and handrails installed > > Graham, > > I must say, you do some wonder looking work. I'm in awe at how good your > chain plate repairs look. As someone who has never worked with epoxy or > glass, I wouldn't even think of attempting what you are doing. I understand > grinding out an area and refilling it with epoxy and sawdust, but how to you > put the gel coat layer on? I've got a couple of areas on my boat that could > use a similar treatment but I wouldn't know where to start. The new grab > rails look fabulous too! - Rob > > Rob Lowe > (still no name) R22 > > -----Original Message----- > From: rhodes22-list-bounces at rhodes22.org > [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 Email > List > Sent: Monday, September 21, 2015 4:13 PM > To: 'The Rhodes 22 Email List' > Subject: Re: [Rhodes22-list] Chainplates and handrails installed > > I just completed installing the new lower chainplates and cabin handrails > and attach some photos for those who might be interested in these projects. > > I removed the lower chainplates by grinding out a fairly large area and then > filled the space with epoxy and sawdust. This created a very solid core that > gave what I hope and expect will be a good place for the new forged eye > bolts that I am using as the new lower chainplates that bolt through the > cabin top. They are sealed with butyl. They cost about $14 each in Canada - > about double the price in the US. > > I replaced the original teak handrails with and 18" and a 24" rail on each > side. I also installed 9" handrails at the front of the cockpit. They are > thru-bolted and sealed with butyl after filling the hole with epoxy and > thickener. The six rails cost about $120 Canadian. They should be > maintenance free and, I think, look good with the new windows. > > Butyl, aside for its excellent qualities as a sealant, is also wonderful to > work with. Given that I do everything a minimum of two times (if I am lucky) > and in the case of the handrail installation, multiple times, it was > remarkably easy to remove the rails and clean up the butyl left behind. > Butyl sticks poorly to everything except itself. As a result you don't need > to mask the area as you can just lift off the butyl that squeezes onto the > deck. To get the tiny bits you can just dab them with a ball of butyl. No > gloves needed. Butyl never hardens so you have no time limits around > installation of cleanup. I can't imagine doing this task with sealant. > > The deck looks white in the photo but actually it is an off-white on the > brown side (System Three Whidby white). > > Next job, if I can get to it before it gets too cold, is to paint the > non-skid areas with Kiwigrip. Then, time permitting, will be the rest of the > deck hardware. > > > Graham Stewart > Agile. R22, 1976 > Kingston Ontario Canada > > > > > -----Original Message----- > From: rhodes22-list-bounces at rhodes22.org > [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 Email > List > Sent: September 15, 2015 11:57 AM > To: 'The Rhodes 22 Email List' > Subject: Re: [Rhodes22-list] Electrical help- nav light anchor light combo > > Ted, > > The diagram shows that you can hook the light up to a single switch that > will be three positions, Front only, Both, or all off. > > This switch would work perfectly. > http://www.ebay.com/itm/6Pin-DPDT-ON-OFF-ON-3-Position-Snap-Boat-Rocker-Swit > ch-6A-250V-10A-125V-AC-/291287946050?hash=item43d21d5342 > > Hook your power to both the center pins. > Then hook the white wire to 1a and 1b (marked on the side of the switch). > Finally, connect the grey wire to 2b. > > Set up this way, the forward light will be lit when the switch is set to the > single dash, and will have both lights lit when the rocker is moved to the > two dash position. > > James > 1971 Rhodes Continental, Still unnamed. > > -----Original Message----- > From: rhodes22-list-bounces at rhodes22.org > [mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 Email > List > Sent: Friday, September 18, 2015 11:50 AM > To: Da List <rhodes22-list at rhodes22.org> > Subject: [Rhodes22-list] Electrical help- nav light anchor light combo > > So, I am trying to figure out the best way to wire my nav lights and anchor > light. It turns out my factory installed perko masthead light is both a > steaming light and a anchor light. Who knew?!? When I turn on the masthead > light on the circuit panel it only turns on the front steaming light part. > > I always just thought it was just a steaming light. However, it is not wired > with a switch to turn on the rear anchor light. Not to my knowledge anyway. > See perko wiring instructions. > > http://www.perko.com/images/catalog/pdf/Figs%201181&84%20Inst%20(1181INS1).p > df > > So I take it I need to wire in a switch to control both? > > How do you guys have your setup? > > Cheers, > Ted > > > __________________________________________________ > To subscribe/unsubscribe go to > http://www.rhodes22.org/mailman/listinfo/rhodes22-list > > For the list Charter and help with using the mailing list and archives go to > http://www.rhodes22.org/list > __________________________________________________ > > __________________________________________________ > To subscribe/unsubscribe go to > http://www.rhodes22.org/mailman/listinfo/rhodes22-list > > For the list Charter and help with using the mailing list and archives go to > http://www.rhodes22.org/list > __________________________________________________ > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: Filling lower shroud holes.jpg > Type: image/jpeg > Size: 69382 bytes > Desc: not available > Url : > http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150921/93c0abe > b/attachment.jpg > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: Blue wave forged eye bolts for lower chainplates.jpg > Type: image/jpeg > Size: 7070 bytes > Desc: not available > Url : > http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150921/93c0abe > b/attachment-0001.jpg > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: Forged eyebolts installed for lower chainplates.jpg > Type: image/jpeg > Size: 35200 bytes > Desc: not available > Url : > http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150921/93c0abe > b/attachment-0002.jpg > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: Handrails and chainplates installed (4).jpg > Type: image/jpeg > Size: 64498 bytes > Desc: not available > Url : > http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150921/93c0abe > b/attachment-0003.jpg > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: Handrails and chainplates installed (2).jpg > Type: image/jpeg > Size: 195024 bytes > Desc: not available > Url : > http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150921/93c0abe > b/attachment-0004.jpg > __________________________________________________ > To subscribe/unsubscribe go to > http://www.rhodes22.org/mailman/listinfo/rhodes22-list > > For the list Charter and help with using the mailing list and archives go to > http://www.rhodes22.org/list > __________________________________________________ > > __________________________________________________ > To subscribe/unsubscribe go to > http://www.rhodes22.org/mailman/listinfo/rhodes22-list > > For the list Charter and help with using the mailing list and archives go to > http://www.rhodes22.org/list > __________________________________________________ > > __________________________________________________ > To subscribe/unsubscribe go to http://www.rhodes22.org/mailman/listinfo/rhodes22-list > > For the list Charter and help with using the mailing list and archives go to http://www.rhodes22.org/list > __________________________________________________
To use your email application to send a messsage to the webmaster rather than this form, .
Your post is being sent... 