< prior
Back to Month
Go to Thread
2015-09-22; 15:53:00 EDT
Member Since
2014-05-06
Posts: 3821
Jefferson, Scroll all the way to the bottom of his email and you will see a link to each photo. HankSee the original archive post
On Tue, Sep 22, 2015 at 3:08 PM, The Rhodes 22 Email List < rhodes22-list at rhodes22.org> wrote: > Hi Graham - I'd love to see the photos but for some reason my computer > blocked them, orŠ > Could you resend to the list? Or to me at jefferson at iteract.ca? > Many thanks, > Jefferson > > On 15-09-22 10:29 AM, "The Rhodes 22 Email List" > <rhodes22-list at rhodes22.org> wrote: > > >Rob: > >Working with epoxy is not difficult but I understand why it might seem > >intimidating. I have used epoxy often in reconstructing a for structural > >repairs on a wooden boat but this boat is the first time I used it for > >surface finishing. So, put this way, it can't possibly be all that > >difficult. Using the fairing additive for the final work makes it is easy > >to > >sand the surface very smooth with no visible seam. However, in this case I > >did not use gel coat as I completely painted the deck using System Three > >waterborne epoxy paint. Gel coat patching is more difficult in terms of > >getting the color just right and I have virtually no experience with it. > >Other than the color, I don't think gel coat is all that difficult if you > >take your time. There are great videos on YouTube that show how it is > >done. > > > >My undertaking of big projects is in no way a function of either skill of > >experience. I am just foolish. But inevitably I find that it is not as > >difficult as it seems and there is virtually nothing that can't be fixed > >or > >redone when, not if, you screw it up. I just take my time and am prepared > >to > >do it repeatedly until I can live with the result. In the end, I do it > >because I like doing it and seeing the result. Reconstruction has to be a > >satisfying process not just a necessary evil that must be endured to get > >to > >the end product. If I didn't enjoy doing it I would never have gotten this > >far and definitely I would not have been able to justify either the time > >or > >expense. I am a social worker by training so that didn't help in any > >technical sense. > > > >So, if you enjoy the process, I don't think there is anything that a > >person > >who can read can't do. The only thing that is impossible, in my books, is > >to > >complete anything according to the time line that I thought was extremely > >generous when I started. Everything takes much longer than I expected so I > >now refuse to tell anyone - especially my wife - when I think the task > >will > >be completed. The lack of technical skill is not the enemy of such > >projects, > >it is being impatient to finish. > > > >Graham > > > >-----Original Message----- > >From: rhodes22-list-bounces at rhodes22.org > >[mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 > >Email > >List > >Sent: September 22, 2015 8:42 AM > >To: The Rhodes 22 Email List > >Subject: Re: [Rhodes22-list] Chainplates and handrails installed > > > >Graham, > > > >I must say, you do some wonder looking work. I'm in awe at how good your > >chain plate repairs look. As someone who has never worked with epoxy or > >glass, I wouldn't even think of attempting what you are doing. I > >understand > >grinding out an area and refilling it with epoxy and sawdust, but how to > >you > >put the gel coat layer on? I've got a couple of areas on my boat that > >could > >use a similar treatment but I wouldn't know where to start. The new grab > >rails look fabulous too! - Rob > > > >Rob Lowe > >(still no name) R22 > > > >-----Original Message----- > >From: rhodes22-list-bounces at rhodes22.org > >[mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 > >Email > >List > >Sent: Monday, September 21, 2015 4:13 PM > >To: 'The Rhodes 22 Email List' > >Subject: Re: [Rhodes22-list] Chainplates and handrails installed > > > >I just completed installing the new lower chainplates and cabin handrails > >and attach some photos for those who might be interested in these > >projects. > > > >I removed the lower chainplates by grinding out a fairly large area and > >then > >filled the space with epoxy and sawdust. This created a very solid core > >that > >gave what I hope and expect will be a good place for the new forged eye > >bolts that I am using as the new lower chainplates that bolt through the > >cabin top. They are sealed with butyl. They cost about $14 each in Canada > >- > >about double the price in the US. > > > >I replaced the original teak handrails with and 18" and a 24" rail on each > >side. I also installed 9" handrails at the front of the cockpit. They are > >thru-bolted and sealed with butyl after filling the hole with epoxy and > >thickener. The six rails cost about $120 Canadian. They should be > >maintenance free and, I think, look good with the new windows. > > > >Butyl, aside for its excellent qualities as a sealant, is also wonderful > >to > >work with. Given that I do everything a minimum of two times (if I am > >lucky) > >and in the case of the handrail installation, multiple times, it was > >remarkably easy to remove the rails and clean up the butyl left behind. > >Butyl sticks poorly to everything except itself. As a result you don't > >need > >to mask the area as you can just lift off the butyl that squeezes onto the > >deck. To get the tiny bits you can just dab them with a ball of butyl. No > >gloves needed. Butyl never hardens so you have no time limits around > >installation of cleanup. I can't imagine doing this task with sealant. > > > >The deck looks white in the photo but actually it is an off-white on the > >brown side (System Three Whidby white). > > > >Next job, if I can get to it before it gets too cold, is to paint the > >non-skid areas with Kiwigrip. Then, time permitting, will be the rest of > >the > >deck hardware. > > > > > >Graham Stewart > >Agile. R22, 1976 > >Kingston Ontario Canada > > > > > > > > > >-----Original Message----- > >From: rhodes22-list-bounces at rhodes22.org > >[mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 > >Email > >List > >Sent: September 15, 2015 11:57 AM > >To: 'The Rhodes 22 Email List' > >Subject: Re: [Rhodes22-list] Electrical help- nav light anchor light combo > > > >Ted, > > > >The diagram shows that you can hook the light up to a single switch that > >will be three positions, Front only, Both, or all off. > > > >This switch would work perfectly. > > > http://www.ebay.com/itm/6Pin-DPDT-ON-OFF-ON-3-Position-Snap-Boat-Rocker-Sw > >it > >ch-6A-250V-10A-125V-AC-/291287946050?hash=item43d21d5342 > > > >Hook your power to both the center pins. > >Then hook the white wire to 1a and 1b (marked on the side of the switch). > >Finally, connect the grey wire to 2b. > > > >Set up this way, the forward light will be lit when the switch is set to > >the > >single dash, and will have both lights lit when the rocker is moved to the > >two dash position. > > > >James > >1971 Rhodes Continental, Still unnamed. > > > >-----Original Message----- > >From: rhodes22-list-bounces at rhodes22.org > >[mailto:rhodes22-list-bounces at rhodes22.org] On Behalf Of The Rhodes 22 > >Email > >List > >Sent: Friday, September 18, 2015 11:50 AM > >To: Da List <rhodes22-list at rhodes22.org> > >Subject: [Rhodes22-list] Electrical help- nav light anchor light combo > > > >So, I am trying to figure out the best way to wire my nav lights and > >anchor > >light. It turns out my factory installed perko masthead light is both a > >steaming light and a anchor light. Who knew?!? When I turn on the masthead > >light on the circuit panel it only turns on the front steaming light > >part. > > > >I always just thought it was just a steaming light. However, it is not > >wired > >with a switch to turn on the rear anchor light. Not to my knowledge > >anyway. > >See perko wiring instructions. > > > > > http://www.perko.com/images/catalog/pdf/Figs%201181&84%20Inst%20(1181INS1) > >.p > >df > > > >So I take it I need to wire in a switch to control both? > > > >How do you guys have your setup? > > > >Cheers, > >Ted > > > > > >__________________________________________________ > >To subscribe/unsubscribe go to > >http://www.rhodes22.org/mailman/listinfo/rhodes22-list > > > >For the list Charter and help with using the mailing list and archives go > >to > >http://www.rhodes22.org/list > >__________________________________________________ > > > >__________________________________________________ > >To subscribe/unsubscribe go to > >http://www.rhodes22.org/mailman/listinfo/rhodes22-list > > > >For the list Charter and help with using the mailing list and archives go > >to > >http://www.rhodes22.org/list > >__________________________________________________ > >-------------- next part -------------- > >A non-text attachment was scrubbed... > >Name: Filling lower shroud holes.jpg > >Type: image/jpeg > >Size: 69382 bytes > >Desc: not available > >Url : > > > http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150921/93c0a > >be > >b/attachment.jpg > >-------------- next part -------------- > >A non-text attachment was scrubbed... > >Name: Blue wave forged eye bolts for lower chainplates.jpg > >Type: image/jpeg > >Size: 7070 bytes > >Desc: not available > >Url : > > > http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150921/93c0a > >be > >b/attachment-0001.jpg > >-------------- next part -------------- > >A non-text attachment was scrubbed... > >Name: Forged eyebolts installed for lower chainplates.jpg > >Type: image/jpeg > >Size: 35200 bytes > >Desc: not available > >Url : > > > http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150921/93c0a > >be > >b/attachment-0002.jpg > >-------------- next part -------------- > >A non-text attachment was scrubbed... > >Name: Handrails and chainplates installed (4).jpg > >Type: image/jpeg > >Size: 64498 bytes > >Desc: not available > >Url : > > > http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150921/93c0a > >be > >b/attachment-0003.jpg > >-------------- next part -------------- > >A non-text attachment was scrubbed... > >Name: Handrails and chainplates installed (2).jpg > >Type: image/jpeg > >Size: 195024 bytes > >Desc: not available > >Url : > > > http://www.rhodes22.org/pipermail/rhodes22-list/attachments/20150921/93c0a > >be > >b/attachment-0004.jpg > >__________________________________________________ > >To subscribe/unsubscribe go to > >http://www.rhodes22.org/mailman/listinfo/rhodes22-list > > > >For the list Charter and help with using the mailing list and archives go > >to > >http://www.rhodes22.org/list > >__________________________________________________ > > > >__________________________________________________ > >To subscribe/unsubscribe go to > >http://www.rhodes22.org/mailman/listinfo/rhodes22-list > > > >For the list Charter and help with using the mailing list and archives go > >to > >http://www.rhodes22.org/list > >__________________________________________________ > > > > > > > > > __________________________________________________ > To subscribe/unsubscribe go to > http://www.rhodes22.org/mailman/listinfo/rhodes22-list > > For the list Charter and help with using the mailing list and archives go > to http://www.rhodes22.org/list > __________________________________________________ >
To use your email application to send a messsage to the webmaster rather than this form, .
Your post is being sent... 