2015-10-04; 10:27:31 EDT
Member Since
2014-05-06
Posts: 3821
Rck: On my boat the lower chainplates consist of a metal tang that wraps under the deck core and goes back about 5" where it is fastened to the core material with a small screw. I expect that the screw has come loose and the chainplate is held only by the fact that the tang end is now pressing down on the inside liner. That happened with all of mine to one degree or another. If you like I can send you a picture of the chainplate after I removed it from my boat. The easiest way to fix the loose chainplate would be to remove a part of the liner and replace the screw. Make sure the core is still solid, if wood, and use epoxy to strengthen the screw hold. Personally, I never liked that particular arrangement for those chainplates. I don't like the fact that the core is exposed to water as is inevitably the case as the slot in the deck for the chainplate leaks and the stress and movement of the chainplate will work the screw loose. Newer boats might have a better arrangement and I think that the core is, I believe, foam. In my case I removed the lower chainplates entirely and replaced them with forged screw bolts. I did it the hard way - from the outside - as I could not see how it was attached and didn't have the presence of mind to pose the question on this list. I have already posted pictures of the old chain plate and my replacement process as I went but if you want this information and can't find it in the archives just let me know and I will resend it all. Graham Graham Stewart Agile. R22, 1976 Kingston Ontario CanadaSee the original archive post