2015-10-06; 09:04:03 EDT
Member Since
2014-05-06
Posts: 3821
Hi Bob, Work to find the sweet spot as far as boom position goes. For us when deploying the main, we let the topping lift out so that the boom is just below horizontal and we just make sure the topping lift is not too loose when furling. We do occasionally have problems with a kink in the outhaul hanging things up when we are furling so we keep an eye on that to make sure it is moving freely through the boom as we furl We do use McLube Sailcote on the bearing once a season (when we remember) and if we remember when the mast is down, we also spray the edges of the slot. We use the Sailcote (http://www.mclubemarine.com/sailkote/) because its a dry lubricant, won't hurt the sails and doesn't attract dirt. Mary Lou 1991 R22 Fretless recycled 1998 Rock Hall, MD At 08:31 AM 10/6/2015, you wrote:See the original archive post