2015-10-15; 18:55:35 EDT
Member Since
2014-05-06
Posts: 3821
Whatever you use to cut the fibreglass you will still need to grind a bevel edge to accept layers of fibreglass to mend the cut. I would be inclined to cut out the sole 4 inches in from the edge and replace the nonskid pattern with non-skid paint once it is reinstalled. That would be easiest. You should be able to cut with a circular saw with the blade installed backwards. You can set the depth to ensure that you don't cut too deep. Graham Stewart Agile. R22, 1976 Kingston Ontario CanadaSee the original archive post