The Rhodes 22 Discussion Group R22 Discussion Group

The Rhodes 22 Discussion Group


< prior

Back to Month

Go to Thread

Member Picture

The Rhodes 22 Email List



Port tack problems

2015-10-24; 14:18:13 EDT

Member Since

2014-05-06

Posts: 3821

Ted,

Do not see the picture.

Some things that can cause the different speeds on different tacks.

Tension of the side stays.  They should be the same on both sides . Use a Lewis gauge to set this according to your manual.

The traveler.  If you are not actively using the traveler, make sure it is centered and not slipping down on one tack.

The jib/Genoa track adjustment.  Should be the same on both sides and give you a nice jib shape.

Back stay adjuster. Put enough tension on this to give you a nice main sail shape when under way .  

Check that all of the trailing edge tell tales on the main are flowing when under way on both tacks.

Other wise, I give up and await better advise

Cheers,

Joe

Joseph Doucet
70 pumping station rd
Ridgefield , ct USA
1-203-512-5629

See the original archive post
×

Message to Webmaster:

To use your email application to send a messsage to the webmaster rather than this form, .



×

Post to the Rhodes 22 Email List:



×

Sending Post:

Your post is being sent... waiting